請問諾西2G后臺的一個MML工具tang、我想請問下我有 BSC網管帳號密碼和網管地址，請問怎么配置諾西[Connections]點擊LOAD導入的.ini文件？ 那個send str 是什么？需要從那里要？ 求大神解釋下

有的朋友說SEND STR 可以空著也可以等進去

我用下面這樣的配置

[Connections]

Connections="BSC數"

Connection1=XX_BSC001,Telnet,網管地址,‘BSC帳號’,‘密碼’,

但是進去tang 點擊左邊的BSC，他顯示的

-----------------------------------------------------------------------         

Cisco Configuration Professional (Cisco CP) is installed on this device.        

This feature requires the one-time use of the username "cisco" with the         

password "cisco". These default credentials have a privilege level of 15.       

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN      

CREDENTIALS                                                                    

Here are the Cisco IOS commands.                                                

username <myuser>  privilege 15 secret 0 <mypassword>                          

no username cisco                                                              

Replace <myuser> and <mypassword> with the username and password you want       

to use.                                                                        

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE       

TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.                        

For more information about Cisco CP please follow the instructions in the       

QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp      

-----------------------------------------------------------------------         

User Access Verification                                                        

Username:                                                                      

Username:

下個模板看看.INI是什么樣的格式，如果沒有模板，可以手動一個個配置BSC，SEND STR是路由網關的密碼，由運營商提供。