 |
善于提問，勤于回答，你也是專家
|
 |
問題已開啟
(普通問題)
NOKIA設備TRX TEST和TRX LOOP TEST的原理和區別？
有沒NOKIA的無線高手，請教下
TRX TEST
TRX LOOP TEST
ABIS LOOP TEST
的原理，即怎么測試的，能發現些什么問題。
另外這些測試間的區別也不是很清楚。
測試也有現場測試，遠程指令測試（都在ZUB?里面）
他們之間是不會有不同······非常qqq
TRX TEST
TRX LOOP TEST
ABIS LOOP TEST
的原理，即怎么測試的，能發現些什么問題。
另外這些測試間的區別也不是很清楚。
測試也有現場測試，遠程指令測試（都在ZUB?里面）
他們之間是不會有不同······非常qqq
NED資料，還不是很清楚
Running a TRX test
The TRX tests can be carried out for Nokia 2nd generation base stations and for Nokia Talk-family of base stations with the STM or with the RFTE. With the RFTE, the test can be carried out via cable. With the STM, the test can also be carried out via air, in addition to cable. For Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite base stations, the TRX test can be carried out without any test equipment. The TRX test is not possible for Nokia InSite base station.
The TRX test checks the radio frequency (RF), digital and analog parts of the BTS and measures how the transmitters and receivers are functioning. When the TRX test is carried out via air, the BTS's RX and TX antennas are also tested. The test gives information on radio level and quality, and this information is indicated as a result of the test. In the TRX test, the BTS sends data to the test equipment, RFTE or STM, which loops it back to the BTS. Thus, the RF signal of one radio timeslot (RTSL) is looped from the transceiver (TX) (transmitter combiner output) to the receiver (RX) (front end input). The TRX test reserves one traffic channel during the test.
The TRX test (performance) can be performed for Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite. It tests both diversity branches even if the diversity is not configured. Testing both of the diversity branches is possible because the loop is made via antenna coupling instead of antenna. TRX tests make a loop between the radio frequency part (RF) and the transmission unit (DTRU) or a loop between the RF part and the D-bus (in the case of a low cost DTRU). The test only take 5 seconds. For Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite the test reserves two traffic channels.
The result of the test can be PASSED, FAILED or INCONCLUSIVE. If the test result is FAILED, check that the threshold values are reasonable. If the test result is INCONCLUSIVE, check the reason field of the test report.
The test results are reported locally at the BSC site as alarm printouts and they are also stored in the BSC's test report history. Test results are stored for the TRX that has been tested. Failed measurement results are reported as alarms. If the TRX test is FAILED, the alarm 7752 (TRX TEST FAILED) is set. By default, this alarm is blocked in the BSC's alarm system. If the TRX test (performance) is FAILED, the alarm 7735 (TRX TEST FAILED) is set. You can modify the PASSED/FAILED threshold limits with the MML commands of the UC command group.
Running a TRX loop test
The TRX loop test can be carried out with Nokia Talk-family of base stations and Nokia PrimeSite without test equipment. The TRX loop test tests the RF parts of the BTS, and A/D and D/A conversions. The TRX is looped from the TX to the RX inside the TRX so that complete TX and RX chains are tested. The TRX loop test reserves two traffic channels during the test.
The test results are reported locally at the BSC site as alarm printouts and they are also stored in the BSC's test report history. FAILED measurement results are reported as alarm 7753 (TRX LOOP TEST FAILED). By default, this alarm is blocked in the BSC's alarm system. You can modify the PASSED/FAILED threshold limits with the MML commands of the UC command group.
Running a TRX test
The TRX tests can be carried out for Nokia 2nd generation base stations and for Nokia Talk-family of base stations with the STM or with the RFTE. With the RFTE, the test can be carried out via cable. With the STM, the test can also be carried out via air, in addition to cable. For Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite base stations, the TRX test can be carried out without any test equipment. The TRX test is not possible for Nokia InSite base station.The TRX test checks the radio frequency (RF), digital and analog parts of the BTS and measures how the transmitters and receivers are functioning. When the TRX test is carried out via air, the BTS's RX and TX antennas are also tested. The test gives information on radio level and quality, and this information is indicated as a result of the test. In the TRX test, the BTS sends data to the test equipment, RFTE or STM, which loops it back to the BTS. Thus, the RF signal of one radio timeslot (RTSL) is looped from the transceiver (TX) (transmitter combiner output) to the receiver (RX) (front end input). The TRX test reserves one traffic channel during the test.
The TRX test (performance) can be performed for Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite. It tests both diversity branches even if the diversity is not configured. Testing both of the diversity branches is possible because the loop is made via antenna coupling instead of antenna. TRX tests make a loop between the radio frequency part (RF) and the transmission unit (DTRU) or a loop between the RF part and the D-bus (in the case of a low cost DTRU). The test only take 5 seconds. For Nokia MetroSite, Nokia Flexi EDGE, and Nokia UltraSite the test reserves two traffic channels.
The result of the test can be PASSED, FAILED or INCONCLUSIVE. If the test result is FAILED, check that the threshold values are reasonable. If the test result is INCONCLUSIVE, check the reason field of the test report.
The test results are reported locally at the BSC site as alarm printouts and they are also stored in the BSC's test report history. Test results are stored for the TRX that has been tested. Failed measurement results are reported as alarms. If the TRX test is FAILED, the alarm 7752 (TRX TEST FAILED) is set. By default, this alarm is blocked in the BSC's alarm system. If the TRX test (performance) is FAILED, the alarm 7735 (TRX TEST FAILED) is set. You can modify the PASSED/FAILED threshold limits with the MML commands of the UC command group.
Running a TRX loop test
The TRX loop test can be carried out with Nokia Talk-family of base stations and Nokia PrimeSite without test equipment. The TRX loop test tests the RF parts of the BTS, and A/D and D/A conversions. The TRX is looped from the TX to the RX inside the TRX so that complete TX and RX chains are tested. The TRX loop test reserves two traffic channels during the test.The test results are reported locally at the BSC site as alarm printouts and they are also stored in the BSC's test report history. FAILED measurement results are reported as alarm 7753 (TRX LOOP TEST FAILED). By default, this alarm is blocked in the BSC's alarm system. You can modify the PASSED/FAILED threshold limits with the MML commands of the UC command group.
提問者:
• 2206機柜設備:載頻，機柜風扇都換了。載頻槽位也改了。小區功率也修改過了。始終還是要出TRX2A25,TX1B27。 除了以上解決方案外請問還有什么方法可以解決 2016-08-20
• 2206機柜設備:載頻，機柜風扇都換了。載頻槽位也改了。小區功率也修改過了。始終還是要出TRX2A25,TX1B27。 請問還有什么方法可以解決 2016-08-20
• 愛立信6601設備總是出現掉小區，要么就出TRX2A45,將硬件更換后用不了多久又掉了。或者又出告警，而且是小區之間輪換著出這樣的問題，軟件版本也升級了。CF卡也換了。IDB也重新加載了。DUG也換了 2016-06-12
• 愛立信設備RBS TRX 2A 23告警 2015-10-12
• 愛立信rbs2206設備，載頻出TRX2a23告警，更換載頻后其他載頻又出同樣的高警，怎么回事 2014-12-18
• RBS6601設備，經常同時出CF2A87，TRX2A45，TRX1A36這三個告警，求大師解 2014-01-18
• 愛立信6000設備一個載頻中的2個TRX本端 2013-12-01
• 愛立信6601設備出現TRXC2A19告警怎么處理 2013-09-21
• 2206機柜設備:載頻，機柜風扇都換了。載頻槽位也改了。小區功率也修改過了。始終還是要出TRX2A25,TX1B27。 請問還有什么方法可以解決 2016-08-20
• 愛立信6601設備總是出現掉小區，要么就出TRX2A45,將硬件更換后用不了多久又掉了。或者又出告警，而且是小區之間輪換著出這樣的問題，軟件版本也升級了。CF卡也換了。IDB也重新加載了。DUG也換了 2016-06-12
• 愛立信設備RBS TRX 2A 23告警 2015-10-12
• 愛立信rbs2206設備，載頻出TRX2a23告警，更換載頻后其他載頻又出同樣的高警，怎么回事 2014-12-18
• RBS6601設備，經常同時出CF2A87，TRX2A45，TRX1A36這三個告警，求大師解 2014-01-18
• 愛立信6000設備一個載頻中的2個TRX本端 2013-12-01
• 愛立信6601設備出現TRXC2A19告警怎么處理 2013-09-21
問題答案
( 2 )
27
32 
• 嘉環科技股份有限公司
聘：湖南電信原廠優化招聘
需求人數：10 人 地點：長沙市,永州市,郴州市,衡陽市
• 杭州東信網絡技術有限公司 聘：長期-石家莊-5G華為后臺
需求人數：3 人 地點：石家莊市
• 福建省鴻官通信工程有限公司 聘：湖南電信原廠優化高級
需求人數：2 人 地點：岳陽市,長沙市
• 成都旗訊通信技術有限公司 聘：招聘督導、傳輸、維護轉網優中高級
需求人數：12 人 地點：寧夏,湖南省,甘肅省,廣西省,青海省
• 廣東南方通信建設有限公司 聘：海南華為精品網項目
需求人數：10 人 地點：海南省
• 浙江明訊網絡技術有限公司 聘：網優工程師（湖南）
需求人數：0 人 地點：長沙市,湘潭市,邵陽市
• 西安長河通訊有限責任公司 聘：網絡優化工程師
需求人數：4 人 地點：渭南市,商洛市,漢中市,安康市
• 重慶信科通信工程有限公司 聘：江西電信原廠高級后臺
需求人數：2 人 地點：九江市
• 北京宜通華瑞科技有限公司 聘：專項優化中高級（江西急聘）
需求人數：5 人 地點：上饒市,景德鎮市,南昌市,鷹潭市
• 安徽引途科技有限公司 聘：福建測試/1個月
需求人數：2 人 地點：福建省
需求人數：10 人 地點：長沙市,永州市,郴州市,衡陽市
• 杭州東信網絡技術有限公司 聘：長期-石家莊-5G華為后臺
需求人數：3 人 地點：石家莊市
• 福建省鴻官通信工程有限公司 聘：湖南電信原廠優化高級
需求人數：2 人 地點：岳陽市,長沙市
• 成都旗訊通信技術有限公司 聘：招聘督導、傳輸、維護轉網優中高級
需求人數：12 人 地點：寧夏,湖南省,甘肅省,廣西省,青海省
• 廣東南方通信建設有限公司 聘：海南華為精品網項目
需求人數：10 人 地點：海南省
• 浙江明訊網絡技術有限公司 聘：網優工程師（湖南）
需求人數：0 人 地點：長沙市,湘潭市,邵陽市
• 西安長河通訊有限責任公司 聘：網絡優化工程師
需求人數：4 人 地點：渭南市,商洛市,漢中市,安康市
• 重慶信科通信工程有限公司 聘：江西電信原廠高級后臺
需求人數：2 人 地點：九江市
• 北京宜通華瑞科技有限公司 聘：專項優化中高級（江西急聘）
需求人數：5 人 地點：上饒市,景德鎮市,南昌市,鷹潭市
• 安徽引途科技有限公司 聘：福建測試/1個月
需求人數：2 人 地點：福建省
熱點問題
更多精彩
| 聯系我們 - 問通信專家 | Powered by MSCBSC 移動通信網 © 2006 - |