 |
善于提問，勤于回答，你也是專家
|
 |
問題已開啟
(普通問題)
提問者:
• 艾默生停電告警怎么接？ 2020-04-09
• 告警不可見怎么設置 2019-11-13
• 中興的LTE設備處天線校正失敗告警怎么處理 2019-09-28
• 射頻單元ALD開關配置不匹配告警如何處理 2019-08-02
• FDD小區接收通道干擾噪聲功率不平衡告警,具體有哪幾種原因造成，解決方案是什么。 2019-07-27
• 無線掉線率差，可以從哪些方面分析如告警、干擾，參數；可以調整哪些參數，請大神具體說明，求教 2019-07-02
• 系統模塊告警 2019-06-14
• 不在基站腳底下不是塔下黑，主鄰區都沒信號，指標是好的，沒有基站退服告警，占卜上信號接收不到這是怎么回事？ 2019-03-13
• 告警不可見怎么設置 2019-11-13
• 中興的LTE設備處天線校正失敗告警怎么處理 2019-09-28
• 射頻單元ALD開關配置不匹配告警如何處理 2019-08-02
• FDD小區接收通道干擾噪聲功率不平衡告警,具體有哪幾種原因造成，解決方案是什么。 2019-07-27
• 無線掉線率差，可以從哪些方面分析如告警、干擾，參數；可以調整哪些參數，請大神具體說明，求教 2019-07-02
• 系統模塊告警 2019-06-14
• 不在基站腳底下不是塔下黑，主鄰區都沒信號，指標是好的，沒有基站退服告警，占卜上信號接收不到這是怎么回事？ 2019-03-13
問題答案
( 4 )
|
7602 BCF NOTIFICATION | |||
|
Severity: |
Object affected: |
Object state: |
Module/Unit: |
|
Minor |
BCF |
Enabled |
ECxA, ESEA, ESMA, EXxA |
|
Fault reason: |
Instruction: |
Alarm cancelling: | |
|
External synchronisation signals disabled. |
1. Check the GPS antenna fix status is OK with LMUManager. Adjust the GPS antenna so that satellites become visible. 2. Check that the GPS cable is correctly mated to LMU. 3. Check that the latest LMU SW is being used. Download newer SW if necessary. 4. Replace LMU. |
Automatic. | |
|
BSS synchronisation failed. |
1. If LMU provides the synchronisation, check if alarm 8202 is active and resolve it. 2. If another BTS is the synchronisation master, check if that it is up and alive. 3. Check that the synchronisation cabling is correctly mated between the units. If LMU is used, check also Q1 cabling and power supply to the LMU unit. 4. Replace ESMA. |
Automatic. | |
|
ESMA System module cooling fan speed has reduced from the set speed. |
1. Check that nothing obstructs the fan(s) from rotating. 2. Clean the fan unit of dust and/or dirt. 3. Replace the fan unit. Note: If "Temperature high/ dangerously high" and/or 7621 alarm(s) are also active, perform these actions as soon as possible. |
Automatic. | |
|
ESMA System module temperature high. |
1. Ensure that the ambient temperature of the base station is below +50C/+122F. 2. Check if any fan alarms are also active. If active, refer to fan alarm instructions to resolve. 3. Replace the ESMA. |
Automatic. | |
|
Remote Tuned Combiner (ECxA) connected to wrong port. |
1. Connect ECxA to ESMA port 1,2 or 3 and issue a BCF reset. |
Automatic. | |
|
EXxx TRX module connected to wrong port. |
1. Connect EXxx module to ESEA. |
Automatic. | |
|
ESEA System Extension module connected to wrong port. |
1. Connect ESEA to port 6 of ESMA, and issue a BCF reset. |
Automatic. | |
|
Unknown module connected to ESxx System (Extension) module. |
1. Check the HW SW compatibility from the SW release binder a. If the module is compatible with the current SW running in the BTS, replace the module. b. If the module is not compatible with the current SW running in the BTS, check which SW version supports the module. Upgrade the BTS SW to the version that supports the module. 2. Remove the unknown module |
Automatic. | |
|
ESEA System Extension module temperature high. |
1. Ensure that the ambient temperature of the base station is below +50C/+122F. 2. If the fault persists, replace ESEA. |
Automatic. | |
|
ESMA System module unable to read internal temperature sensors |
1. Replace the ESMA. Note: If fan alarm(s) are active at ESMA, perform this action as soon as possible. | ||
回答者：
philiptantan
回答時間：2009-05-18 17:07
8
9
總之和ＥＳＭＡ有很大關系。先檢查天線狀態，一些連接線的連接狀況，還有一些調試的方法仔細看ｉｎｓｔｒｕｃｔｉｏｎ有詳細講解
回答者：
philiptantan
回答時間：2009-05-18 17:11
3
1
答：
出現7602的原因有多種，最好把電腦連到UTRASITE上看看告警的英文解釋，一般說的比較詳細。要對癥下藥了
出現7602的原因有多種，最好把電腦連到UTRASITE上看看告警的英文解釋，一般說的比較詳細。要對癥下藥了
感谢您访问我们的网站，您可能还对以下资源感兴趣：
CHINESE丰满熟妇VIDEOS