 |
善于提問，勤于回答，你也是專家
|
 |
問題已開啟
(普通問題)
提問者:
• lte atTACh何時會攜帶imsi 2020-10-30
• 5G網絡UE開機進入空閑態后，在AtTACh流程中會執行哪些操作？ 2019-09-17
• 5G網絡UE開機進入空閑態后，在AtTACh流程中會執行哪些操作 2019-08-06
• atTACh附著 2018-10-12
• mate9連probe做不了AtTACh，有大神知道怎么解決 2017-03-17
• 終端進行atTACh中的pdn連接請求 2017-03-06
• 關于上發的deTAChrequest的原因 2017-03-02
• 手機上發imsideTAChindication導致掉話，求分析 2016-11-03
• 5G網絡UE開機進入空閑態后，在AtTACh流程中會執行哪些操作？ 2019-09-17
• 5G網絡UE開機進入空閑態后，在AtTACh流程中會執行哪些操作 2019-08-06
• atTACh附著 2018-10-12
• mate9連probe做不了AtTACh，有大神知道怎么解決 2017-03-17
• 終端進行atTACh中的pdn連接請求 2017-03-06
• 關于上發的deTAChrequest的原因 2017-03-02
• 手機上發imsideTAChindication導致掉話，求分析 2016-11-03
問題答案
( 2 )
哈哈， 我猜 paging里面是按照imsi做的paging吧 ？
回答者：
ebrain68
回答時間：2014-05-21 13:36
10
6
是IMSI，求詳解
hlsfy 2014-05-21 14:11
en ,那就是了，這個paging應該是網絡測出現了狀況，你可以咨詢epc的人，下面是這個地方的描述：
Paging for EPS services using IMSI is an abnormal procedure used for error recovery in the network.
The network may initiate paging for EPS services using IMSI with CN domain indicator set to "PS" if the S-TMSI is not available due to a network failure (see example in figure 5.6.2.2.2.1).
Figure 5.6.2.2.2.1: Paging procedure using IMSI
In S1 mode, to initiate the procedure the EMM entity in the network requests the lower layer to start paging. If the TAI list is not available due to a network failure, the network may perform the paging within all tracking areas served by the MME (see 3GPP TS 36.331 [22] and 3GPP TS 36.413 [23]).
When a UE receives a paging for EPS services using IMSI from the network before a UE initiated EMM specific procedure has been completed, then the UE shall abort the EMM specific procedure and proceed according to the description in this subclause.
Upon reception of a paging for EPS services using IMSI, the UE shall locally deactivate any EPS bearer context(s) and locally detach from EPS. Additionally the UE shall delete the following parameters: last visited registered TAI, TAI list, GUTI and KSIASME. The UE shall set the EPS update status to EU2 NOT UPDATED and change the state to EMM-DEREGISTERED.
If A/Gb mode or Iu mode is supported by the UE, the UE shall in addition handle the GMM parameters GMM state, GPRS update status, P-TMSI, P-TMSI signature, RAI, and GPRS ciphering key sequence number as specified in 3GPP TS 24.008 [13] for the case when a paging for GPRS services using IMSI is received.
After performing the local detach, the UE shall then perform an attach procedure as described in subclause 5.5.1.2. If the UE is operating in CS/PS mode 1 or CS/PS mode 2 of operation, then the UE shall perform a combined attach procedure as described in subclause 5.5.1.3.
NOTE 1: In some cases, user interaction can be required, thus the UE cannot activate the dedicated bearer context(s) automatically.
NOTE 2: The UE does not respond to the paging except with the attach request, hence timer T3413 in the network is not used when paging with IMSI.
5.6.2.2.2 Paging for EPS services through E-UTRAN using IMSI
Paging for EPS services using IMSI is an abnormal procedure used for error recovery in the network.
The network may initiate paging for EPS services using IMSI with CN domain indicator set to "PS" if the S-TMSI is not available due to a network failure (see example in figure 5.6.2.2.2.1).
Figure 5.6.2.2.2.1: Paging procedure using IMSI
In S1 mode, to initiate the procedure the EMM entity in the network requests the lower layer to start paging. If the TAI list is not available due to a network failure, the network may perform the paging within all tracking areas served by the MME (see 3GPP TS 36.331 [22] and 3GPP TS 36.413 [23]).
When a UE receives a paging for EPS services using IMSI from the network before a UE initiated EMM specific procedure has been completed, then the UE shall abort the EMM specific procedure and proceed according to the description in this subclause.
Upon reception of a paging for EPS services using IMSI, the UE shall locally deactivate any EPS bearer context(s) and locally detach from EPS. Additionally the UE shall delete the following parameters: last visited registered TAI, TAI list, GUTI and KSIASME. The UE shall set the EPS update status to EU2 NOT UPDATED and change the state to EMM-DEREGISTERED.
If A/Gb mode or Iu mode is supported by the UE, the UE shall in addition handle the GMM parameters GMM state, GPRS update status, P-TMSI, P-TMSI signature, RAI, and GPRS ciphering key sequence number as specified in 3GPP TS 24.008 [13] for the case when a paging for GPRS services using IMSI is received.
After performing the local detach, the UE shall then perform an attach procedure as described in subclause 5.5.1.2. If the UE is operating in CS/PS mode 1 or CS/PS mode 2 of operation, then the UE shall perform a combined attach procedure as described in subclause 5.5.1.3.
NOTE 1: In some cases, user interaction can be required, thus the UE cannot activate the dedicated bearer context(s) automatically.
NOTE 2: The UE does not respond to the paging except with the attach request, hence timer T3413 in the network is not used when paging with IMSI.
ebrain68 2014-05-25 00:30
此前UE做了兩次TAU,UE可能是進入新的TAC,RRC進行釋放;中斷了同網絡的連接;因此重新發起Attach請求...
回答者：
litom2004
回答時間：2014-05-21 14:39
11
10
正常的TAU都會有rrc的連接與釋放的，這是信令的建立與釋放，但這不影響在網狀態吧。
hlsfy 2014-05-21 14:44
根據樓主的截圖,UE在ATTACH之后仍在4G網絡中進行信令交互,還沒有收到回落2G的RRC釋放消息!
litom2004 2014-05-22 15:27
• 元道通信股份有限公司
聘：中級后臺網優工程師/福建漳州
需求人數：1 人 地點：漳州市
• 重慶信科通信工程有限公司 聘：后臺優化
需求人數：2 人 地點：南昌市
• 安徽引途科技有限公司 聘：蚌埠移動項目經理
需求人數：1 人 地點：蚌埠市
• 怡利科技發展有限公司 聘：網優工程師（初級）
需求人數：5 人 地點：貴州省
• 南京格安信息系統有限責任公司 聘：5G工程單驗人員
需求人數：10 人 地點：北京市
• 浙江省郵電工程建設有限公司 聘：寧夏中興5G網優中高級工程師
需求人數：6 人 地點：寧夏
• 浙江明訊網絡技術有限公司 聘：浙江網絡優化工程師
需求人數：8 人 地點：寧波市,舟山市,湖州市,紹興市
• 河北中創盈和通信科技有限公司 聘：中級前臺/寧夏中衛
需求人數：2 人 地點：寧夏
• 嘉環科技股份有限公司 聘：湖南電信原廠優化招聘
需求人數：10 人 地點：長沙市,永州市,郴州市,衡陽市
• 西安中興精誠通訊有限公司 聘：重慶萬涪黔區域網優前臺
需求人數：3 人 地點：重慶市
需求人數：1 人 地點：漳州市
• 重慶信科通信工程有限公司 聘：后臺優化
需求人數：2 人 地點：南昌市
• 安徽引途科技有限公司 聘：蚌埠移動項目經理
需求人數：1 人 地點：蚌埠市
• 怡利科技發展有限公司 聘：網優工程師（初級）
需求人數：5 人 地點：貴州省
• 南京格安信息系統有限責任公司 聘：5G工程單驗人員
需求人數：10 人 地點：北京市
• 浙江省郵電工程建設有限公司 聘：寧夏中興5G網優中高級工程師
需求人數：6 人 地點：寧夏
• 浙江明訊網絡技術有限公司 聘：浙江網絡優化工程師
需求人數：8 人 地點：寧波市,舟山市,湖州市,紹興市
• 河北中創盈和通信科技有限公司 聘：中級前臺/寧夏中衛
需求人數：2 人 地點：寧夏
• 嘉環科技股份有限公司 聘：湖南電信原廠優化招聘
需求人數：10 人 地點：長沙市,永州市,郴州市,衡陽市
• 西安中興精誠通訊有限公司 聘：重慶萬涪黔區域網優前臺
需求人數：3 人 地點：重慶市
熱點問題
更多精彩
| 聯系我們 - 問通信專家 | Powered by MSCBSC 移動通信網 © 2006 - |