【資料名稱】：MGW M13 INTEGRATION

【資料作者】：NOKIA

【資料日期】：2009

【資料語言】：英文

【資料格式】：DOC

【資料目錄和簡(jiǎn)介】：


TABLE OF CONTENT
1.Define signalling configuration3
1.1Create own signalling point3
1.2Create signalling service3
1.3Create signalling link3
1.4Create signalling link set3
1.5Create signallin route set3
1.6Active signalling links,route4
2.IP&&SIGTRAN CONFIGURATION4
2.1IP configuration4
2.1.1Create units’ IP address4
2.1.2Create IP static route4
2.2SIGTRAN(signalling protocols transported over IP network,it define SCTP and M3UA)4
2.2.1Define association set parameter4
2.2.2Create association set5
2.2.3Add association to association set5
2.2.4Create SCTP multihoming5
2.2.5Create IP type of signalling link set5
2.2.6Create signalling route5
2.3Create virtual MGW(MEGAGO)5
3.Create Circuit Group5
4.Announcement use6
4.1Transfer announcement file6
4.2Create Announcement Special Route7
4.3Change the state ofannouncement from OFF to ON7
4.4Create AnnouncementAnalysisin Tree 487
5.Parameters cONFIGURATION7
5.1PRFILE checking7
5.2Check the default MAP parameter7
5.3MAP parameter checking7
5.4BSSAP parameter checking7
5.5Camel service(IN service)7
5.5.1Create service set7
5.5.2Create trigger7