資料開放給大家，（該資料個人感覺不值20威望）方便大家下載！

附件內容如下：

擴容增加載頻的方法

MMI-RAM 0115 ->
MMI-RAM 0115 -> equip 1 DRI
Enter the 1st and 2nd DRI id: 0 2 第幾塊載頻
Enter the density of this DRI: 1H1的選1或的SIGLE H2的選2或DOUBLE
Enter the cabinet identifier: 0第幾個機柜
Enter the type of connection to the BTP: 0主機柜為0 或 MASTER
Enter the port to which the TCU is connected: 2 第幾個槽位
Enter the 1st and 2nd RTF id: 一般空著
Enter the GSM cell ID where the DRI appears: 4 6 0 0 0 34700 26061
Enter antenna select number for this cell: 2與實物一致
Does this DRI use tuneable combining: no一般為NO
Enter diversity flag for this DRI: 1一般為1
Enter the fm cell type: 4一般為4


MMI-RAM 0115 ->
MMI-RAM 0115 -> equip 1 RTF
Enter type of carrier: NON_BCCHNON_BCCH和 BCCH
Enter the 1st and 2nd RTF id: 2 3幾扇區幾載頻
Enter primary Unique PATH id: 0一條PATH帶14個CTU 超過14個CTU選1
Enter the optional secondary Unique PATH id:一般空著
Enter the GSM cell to which this carrier is assigned: 4 6 0 0 0 34700 26063
Enter carrier absolute radio freq. channel: 50頻點
Enter the 8 carrier frequency hopping indicators: 255 255 255 255 255 255 255 255跳頻為8個0，不調頻為8個255
Enter the 8 carrier training sequence codes: 6 6 6 6 6 6 6 6本站的BSIC號除以8的余數
Enter SDCCH load: 2 開了幾個SDCCH例 16個SDCCH則選2，8個SDCCH則選1
Enter SDCCH placement priority: 1
Enter channel allocation priority: 1
CM: allocating timeslot 8.
CM: allocating timeslot 9.