照著做吧
Analyse Alarm Information
Print the event reporting data.
Use command ERESP.

Printout:
EVENT REPORTING DATA

Reset Alarm
Reset the alarm.
Use command EREAR.

Printout:
EVENT REPORTING RESULT


Note:
If the stored event reports are not required, use parameter NP.
Change Event Reporting Data?
Is there event reporting data to be set or changed?
Yes
Go to Step 4.
No
Go to Step 9.

Note:
See printout EVENT REPORTING DATA.
Change Event Reporting Data
End event reporting.
Use command EREPE.

Printout:
EVENT REPORTING RESULT

Change the event reporting data.
Use command ERESC.

Verify the event reporting data.
Use command ERESP.

Printout:
EVENT REPORTING DATA

Initiate Event Reporting
Is the event reporting to be initiated?
Yes
Go to Step 8.
No
Go to Step 9.
Initiate event reporting.
Use command EREPI.

Job Completed
Make a report.

Note:
See Operational Instruction Report of Finished Work.
The job is completed.