【資料名稱】：愛立信最新交換機(jī)資料APG43&CP55&CP60

【資料作者】：愛立信

【資料日期】：20090817

【資料語(yǔ)言】：英文

【資料格式】：PDF

【資料目錄和簡(jiǎn)介】：

Contents
1 Introduction 4
1.1 Concerned Hardware 4
2 Range of Test 4
2.1 Work Flow 6
3 Conditions before Starting 7
4 Test Tools 7
5 General 7
5.1 APZ 212 55 Front Side 7
5.1.1 BSC Board Configuration 8
5.1.2 CN Board Configuration 9
5.2 APZ 212 60 Front Side 10
5.2.1 CN Board Configuration 10
5.3 Board Information of eGEM with APG43 and APZ 212 55 11
5.4 Cabling for APZ 212 55 13
6 Method 14
6.1 Preparation 14
6.1.1 Requirements 14
6.1.2 Power Up 14
6.1.3 Connect to the APG43 14
6.2 Activate Weekly Routine Test 14
6.3 Manual Intervention when CP-A is EX 16
6.4 Manual Intervention when CP-B is EX 19
6.5 Manual Initiated Small Restart 21
6.6 Manual Initiated Large Restart 22
6.7 Activate the Command Log 24
6.8 Manual Initiated Large Restart with Reload from MS 27
6.9 Manual Initiated Large Restart with Reload from File 31
6.10 FEX Load by Disconnecting CPU-Boards 34
6.10.1 FEX Load on CP-A 34
6.10.2 FEX Load on CP-B 37
6.11 Function Change Method II 39
6.12 Clear All SYRIP Information 42
7 HELPFUL HINTS 45
7.1 Exchange Data 45
7.1.1 Adjunct Processor File 45
7.2 Command Log 45
7.2.1 Command Log, Activate 45
7.2.2 Command Log, Deactivate 46
7.3 AP Audit Log 46
7.3.1 Activation of AP Audit Log 46
7.3.2 Deactivation of AP Audit Log 47
7.4 Manual Rotation of RELFSW Files 48
7.5 Exchange Header Information at FEX loading 50
7.6 Information Displayed by a CDU 50
7.6.1 Left-Most Digit, Encoding 50
7.6.2 Numerical Value, Intervals 51
7.6.3 Numerical Values, during Loading of CP 51
7.6.4 Numerical Values, during Remote Upgrade of Firmware 52
7.6.5 Numerical Values, when a Fault is detected during Loading of CP53
7.6.6 Description of Lamps 56
7.7 References 57
8 Revision Information 59
9 Glossary 60
9.1 Terminology 60
9.2 Abbreviations 61