【資料名稱】：3GPP TS 25.101 V7.3.0 (2006-03)

【資料作者】：3GPP

【資料日期】：2006-03

【資料語(yǔ)言】：英文

【資料格式】：DOC

【資料目錄和簡(jiǎn)介】：

Foreword8
1Scope9
2References9
3Definitions, symbols and abbreviations9
3.1Definitions9
3.2Abbreviations10
4General12
4.1Relationship between Minimum Requirements and Test Requirements12
4.2Power Classes12
4.3Control and monitoring functions12
4.3.1Minimum requirement12
5Frequency bands and channel arrangement12
5.1General12
5.2Frequency bands12
5.3TX–RX frequency separation13
5.4Channel arrangement13
5.4.1Channel spacing13
5.4.2Channel raster13
5.4.3Channel number13
5.4.4UARFCN15
6Transmitter characteristics15
6.1General15
6.2Transmit power15
6.2.1UE maximum output power15
6.2.2UE maximum output, power with HS-DPCCH and E-DCH16
6.3Frequency Error16
6.4Output power dynamics17
6.4.1Open loop power control17
6.4.1.1Minimum requirement17
6.4.2Inner loop power control in the uplink17
6.4.2.1Power control steps17
6.4.2.1.1Minimum requirement17
6.4.3Minimum output power18
6.4.3.1Minimum requirement18
6.4.4Out-of-synchronization handling of output power18
6.4.4.1Minimum requirement18
6.4.4.2Test case18
6.5Transmit ON/OFF power20
6.5.1Transmit OFF power20
6.5.1.1Minimum requirement20
6.5.2Transmit ON/OFF Time mask20
6.5.2.1Minimum requirement20
6.5.3Change of TFC22
6.5.3.1Minimum requirement22
6.5.4Power setting in uplink compressed mode23
6.5.4.1Minimum requirement24
6.5.5HS-DPCCH25
6.5.5.1Minimum requirement25
6.6Output RF spectrum emissions26
6.6.1Occupied bandwidth26
6.6.2Out of band emission26
6.6.2.1Spectrum emission mask27
6.6.2.1.1Minimum requirement27
6.6.2.2Adjacent Channel Leakage power Ratio (ACLR)27
6.6.2.2.1Minimum requirement27
6.6.3Spurious emissions28
6.6.3.1Minimum requirement28
6.7Transmit intermodulation30
6.7.1Minimum requirement30
6.8Transmit modulation30
6.8.1Transmit pulse shape filter30
6.8.2Error Vector Magnitude31
6.8.2.1Minimum requirement31
6.8.3Peak code domain error31
6.8.3.1Minimum requirement31
6.8.4Phase discontinuity31
6.8.4.1Minimum requirement32
7Receiver characteristics32
7.1General32
7.2Diversity characteristics32
7.3Reference sensitivity level33
7.3.1Minimum requirement33
7.4Maximum input level33
7.4.1Minimum requirement for DPCH reception33
7.4.2Minimum requirement for HS-PDSCH reception34
7.4.2.1Minimum requirement for 16QAM34
7.5Adjacent Channel Selectivity (ACS)34
7.5.1Minimum requirement34
7.6Blocking characteristics35
7.6.1Minimum requirement (In-band blocking)35
7.6.2Minimum requirement (Out of-band blocking)36
7.6.3Minimum requirement (Narrow band blocking)37
7.7Spurious response37
7.7.1Minimum requirement37
7.8Intermodulation characteristics37
7.8.1Minimum requirement37
7.8.2Minimum requirement (Narrow band)38
7.9Spurious emissions38
7.9.1Minimum requirement38
8Performance requirement40
8.1General40
8.2Demodulation in static propagation conditions40
8.2.1(void)40
8.2.2Demodulation of Forward Access Channel (FACH)40
8.2.3Demodulation of Dedicated Channel (DCH)40
8.2.3.1Minimum requirement40
8.3Demodulation of DCH in multi-path fading propagation conditions41
8.3.1Single Link Performance41
8.3.1.1Minimum requirement41
8.4Demodulation of DCH in moving propagation conditions43
8.4.1Single link performance43
8.4.1.1Minimum requirement44
8.5Demodulation of DCH in birth-death propagation conditions44
8.5.1Single link performance44
8.5.1.1Minimum requirement44
8.6Demodulation of DCH in downlink Transmit diversity modes45
8.6.1Demodulation of DCH in open-loop transmit diversity mode45
8.6.1.1Minimum requirement45
8.6.2Demodulation of DCH in closed loop transmit diversity mode45
8.6.2.1Minimum requirement45
8.6.3Void46
8.7Demodulation in Handover conditions46
8.7.1Demodulation of DCH in Inter-Cell Soft Handover46
8.7.1.1Minimum requirement46
8.7.2Combining of TPC commands from radio links of different radio link sets47
8.7.2.1Minimum requirement47
8.7.3Combining of reliable TPC commands from radio links of different radio link sets47
8.7.3.1Minimum requirement47
8.8Power control in downlink48
8.8.1Power control in the downlink, constant BLER target48
8.8.1.1Minimum requirements48
8.8.2Power control in the downlink, initial convergence49
8.8.2.1Minimum requirements49
8.8.3Power control in downlink, wind up effects50
8.8.3.1Minimum requirements50
8.8.4Power control in the downlink, different transport formats50
8.8.4.1Minimum requirements50
8.8.5Power control in the downlink for F-DPCH51
8.8.5.1Minimum requirements51
8.9Downlink compressed mode52
8.9.1Single link performance52
8.9.1.1Minimum requirements52
8.10Blind transport format detection53
8.10.1Minimum requirement53
8.11Detection of Broadcast channel (BCH)54
8.11.1Minimum requirement without transmit diversity54
8.11.2Minimum requirement with open loop transmit diversity54
8.12Demodulation of Paging Channel (PCH)55
8.12.1Minimum requirement55
8.13Detection of Acquisition Indicator (AI)55
8.13.1Minimum requirement56
8.14Void56
8.15Void56
8.16Void56
9Performance requirement (HSDPA)57
9.1Void57
9.2Demodulation of HS-DSCH (Fixed Reference Channel)57
9.2.1Single Link performance59
9.2.1.1Requirement QPSK, Fixed Reference Channel (FRC) H-Set 1/2/359
9.2.1.2Requirement 16QAM, Fixed Reference Channel (FRC) H-Set 1/2/360
9.2.1.3Minimum requirement QPSK, Fixed Reference Channel (FRC) H-Set 4/561
9.2.1.4Requirement QPSK, Fixed Reference Channel (FRC) H-Set 662
9.2.1.5Requirement 16QAM, Fixed Reference Channel (FRC) H-Set 664
9.2.2Open Loop Diversity performance65
9.2.2.1Requirement QPSK, Fixed Reference Channel (FRC) H-Set 1/2/365
9.2.2.2Requirement 16QAM, Fixed Reference Channel (FRC) H-Set 1/2/366
9.2.2.3Minimum requirement QPSK, Fixed Reference Channel (FRC) H-Set 4/567
9.2.3Closed Loop Diversity Performance68
9.2.3.1Requirement QPSK, Fixed Reference Channel (FRC) H-Set 1/2/368
9.2.3.2Requirement 16QAM, Fixed Reference Channel (FRC) H-Set 1/2/370
9.2.3.3Minimum requirement QPSK, Fixed Reference Channel (FRC) H-Set 4/571
9.2.3.4Requirement QPSK, Fixed Reference Channel (FRC) H-Set 672
9.2.3.5Requirement 16QAM, Fixed Reference Channel (FRC) H-Set 672
9.3Reporting of Channel Quality Indicator73
9.3.1Single Link Performance73
9.3.1.1AWGN propagation conditions73
9.3.1.1.1Minimum Requirement – UE capability categories 1-8 and 11, 1273
9.3.1.2Fading propagation conditions74
9.3.1.2.1Minimum Requirement – UE capability categories 1-8 and 11, 1274
9.3.2Open Loop Diversity Performance75
9.3.2.1AWGN propagation conditions75
9.3.2.1.1Minimum Requirement - UE capability categories 1-8 and 11, 1275
9.3.2.2Fading propagation conditions76
9.3.2.2.1Minimum Requirement – UE capability categories 1-8 and 11, 1276
9.3.3Closed Loop Diversity Performance77
9.3.3.1AWGN propagation conditions77
9.3.3.1.1Minimum Requirement - UE capability categories 1-8 and 11, 1277
9.3.3.2Fading propagation conditions78
9.3.3.2.1Minimum Requirement – UE capability categories 1-8 and 11, 1278
9.4HS-SCCH Detection Performance79
9.4.1Single Link Performance79
9.4.2Open Loop Diversity Performance80
10Performance requirement (E-DCH)81
10.1General81
10.2Detection of E-DCH HARQ ACK Indicator Channel (E-HICH)82
10.2.1Single link performance82
10.2.1.1Minimum requirement82
10.2.2Detection in Inter-Cell Handover conditions83
10.2.2.1Minimum requirement for RLS not containing the Serving E-DCH cell83
10.2.2.2Minimum requirement for RLS containing the serving E-DCH cell84
10.3Detection of E-DCH Relative Grant Channel (E-RGCH)85
10.3.1Single link performance85
10.3.1.1Minimum requirement85
10.3.2Detection in Inter-Cell Handover conditions86
10.3.2.1Minimum requirement for Non-serving E-DCH RL86
10.4Demodulation of E-DCH Absolute Grant Channel (E-AGCH)87
10.4.1Single link performance87
10.4.1.1Minimum requirement87
11Performance requirement (MBMS)87
11.1Demodulation of MCCH87
11.1.1Minimum requirement87
11.2Demodulation of MTCH88
11.2.1Minimum requirement88
11.3Demodulation of MTCH and cell identification88
11.3.1Minimum requirement89
Annex A (normative):Measurement channels90
A.1General90
A.2UL reference measurement channel90
A.2.1UL reference measurement channel (12.2 kbps)90
A.2.2UL reference measurement channel (64 kbps)91
A.2.3UL reference measurement channel (144 kbps)92
A.2.4UL reference measurement channel (384 kbps)93
A.2.5UL reference measurement channel (768 kbps)94
A.3DL reference measurement channel95
A.3.0DL reference measurement channel (0 kbps)95
A.3.1DL reference measurement channel (12.2 kbps)96
A.3.2DL reference measurement channel (64 kbps)97
A.3.3DL reference measurement channel (144 kbps)98
A.3.4DL reference measurement channel (384 kbps)98
A.3.5DL reference measurement channel 2 (64 kbps)99
A.4DL reference measurement channel for BTFD performance requirements101
A.4AVoid103
A.5DL reference compressed mode parameters103
A.6DL reference parameters for PCH tests104
A.7DL reference channel parameters for HSDPA tests105
A.7.1Fixed Reference Channel (FRC)105
A.7.1.1Fixed Reference Channel Definition H-Set 1105
A.7.1.2Fixed Reference Channel Definition H-Set 2106
A.7.1.3Fixed Reference Channel Definition H-Set 3107
A.7.1.4Fixed Reference Channel Definition H-Set 4108
A.7.1.5Fixed Reference Channel Definition H-Set 5109
A.7.1.6Fixed Reference Channel Definition H-Set 6109
A.8DL reference parameters for MBMS tests110
A.8.1MCCH110
A.8.1MTCH111
A.9DL reference parameters for combined MTCH demodulation and cell identification111
Annex B (normative):Propagation conditions113
B.1General113
B.2Propagation Conditions113
B.2.1Static propagation condition113
B.2.2Multi-path fading propagation conditions113
B.2.3Moving propagation conditions115
B.2.4Birth-Death propagation conditions115
Annex C (normative):Downlink Physical Channels117
C.1General117
C.2Connection Set-up117
C.3During connection117
C.3.1Measurement of Rx Characteristics117
C.3.2Measurement of Performance requirements118
C.3.3Connection with open-loop transmit diversity mode119
C.3.4Connection with closed loop transmit diversity mode119
C.3.5Void120
C.4W-CDMA Modulated Interferer121
C.5HSDPA DL Physical channels121
C.5.1Downlink Physical Channels connection set-up121
C.5.2OCNS Definition126
C.6MBMS DL Physical channels127
C.6.1Downlink Physical Channels connection set-up127
Annex D (normative):Environmental conditions128
D.1General128
D.2Environmental requirements128
D.2.1Temperature128
D.2.2Voltage128
D.2.3Vibration129
Annex E (informative):UARFCN numbers130
E.1General130
E.2List of UARFCN used for UTRA FDD bands130
Annex F (informative):Change history132