MSCBSC 移動通信論壇
搜索
登錄注冊
網絡優化工程師招聘專欄 4G/LTE通信工程師最新職位列表 通信實習生/應屆生招聘職位

  • 閱讀:20866
  • 回復:7
可以PDP激活的用戶偶爾發生Requested service option not subscribed的原因
neverfever
初級會員



 發短消息    關注Ta 

積分 226
帖子 25
威望 2765 個
禮品券 0 個
專家指數 -2
注冊 2009-4-9
專業方向  核心網
回答問題數 0
回答被采納數 0
回答采納率 0%
 
發表于 2011-01-05 16:24:33  只看樓主 
請問,在PDP激活時,同一個IMSI在同一個小區下多次發起激活。前一次可以正常激活,后一次卻不行了。返回內容中有:
7.SMCause: 33 - Requested service option not subscribed

一直找不到原因。
是不是因?yàn)榈谝淮渭せ钜院鬀]有detach,手機再次發起激活導致SGSN拒絕?

下面是PDP激活request的字段:
Frame 1: 127 bytes on wire (1016 bits), 127 bytes captured (1016 bits)
Arrival Time: Jan3, 2011 09:03:40.000000000 China Standard Time
Epoch Time: 1294016620.000000000 seconds
[Time delta from previous captured frame: 0.000000000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 0.000000000 seconds]
Frame Number: 1
Frame Length: 127 bytes (1016 bits)
Capture Length: 127 bytes (1016 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: raw:ip:udp:gprs-ns:bssgp:llcgprs:gsm_a_dtap:ipcp:ipcp:pap]
Raw packet data
No link information available
Internet Protocol, Src: 0.0.0.1 (0.0.0.1), Dst: 0.0.0.1 (0.0.0.1)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
0000 00.. = Differentiated Services Codepoint: Default (0x00)
.... ..0. = ECN-Capable Transport (ECT): 0
.... ...0 = ECN-CE: 0
Total Length: 127
Identification: 0x0000 (0)
Flags: 0x00
0... .... = Reserved bit: Not set
.0.. .... = Don't fragment: Not set
..0. .... = More fragments: Not set
Fragment offset: 0
Time to live: 62
Protocol: UDP (17)
Header checksum: 0x7c6d [correct]
[Good: True]
[Bad: False]
Source: 0.0.0.1 (0.0.0.1)
Destination: 0.0.0.1 (0.0.0.1)
User Datagram Protocol, Src Port: dnp-sec (19999), Dst Port: dnp-sec (19999)
Source port: dnp-sec (19999)
Destination port: dnp-sec (19999)
Length: 107
Checksum: 0x0000 (none)
[Good Checksum: False]
[Bad Checksum: False]
GPRS Network Service, PDU type: NS_UNITDATA, BVCI 10404
PDU type: NS_UNITDATA (00)
NS SDU Control bits: 00
.... ...0 = Request change flow: Not set
.... ..0. = Confirm change flow: Not set
0000 00.. = Spare bits: 0x00
BVCI: 10404
Base Station Subsystem GPRS Protocol
PDU Type: UL-UNITDATA (0x1)
TLLI: 0xd0cbb2d7
TLLI: 0xd0cbb2d7
QoS Profile
Peak bit rate: 524200 bits/s
..1. .... = C/R: The SDU does not contain command/response frame type
...1 .... = T: The SDU contains data
.... 0... = A: Radio interface uses RLC/MAC ARQfunctionality
.... .000 = Precedence: High priority (0)
Cell Identifier: RAI 460-00-26569-37, CI 10306
MCC: China (People's Republic of) (460)
MNC: 0
LAC: 26569
RAC: 37
CI: 0x2842
Alignment Octets (0 bytes)
LLC PDU
MS-SGSN LLC (Mobile Station - Serving GPRS Support Node Logical Link Control)SAPI: GPRS Mobility Management
FCS: 0x424524 (correct)
Address fieldSAPI: LLGMM
0... .... = Protocol Discriminator_bit: OK
.0.. .... = Command/Response bit: DownLink/UpLink = Response/Command
.... 0001 = SAPI: GPRS Mobility Management (1)
Unconfirmed Information format - UI, N(U) = 8
110. .... .... .... = UI format: 0x0006
...0 0... .... .... = Spare bits: 0x0000
.... .000 0010 00.. = N(U): 8
.... .... .... ..0. = E bit:non encrypted frame
.... .... .... ...1 = PM bit: FCS covers the frame header and information fields
GSM A-I/F DTAP - Activate PDP Context Request
Protocol Discriminator: GPRS session management messages
0... .... = TI flag: allocated by sender
.010 .... = TIO: 2
.... 1010 = Protocol discriminator: GPRS session management messages (10)
01.. .... = Sequence number: 1
DTAP GPRS Session Management Message Type: Activate PDP Context Request (0x41)
NSAPI: 0x07 (7)
0000 .... = Spare bit(s): 0
.... 0011 = LLC SAPI: SAPI 3 (3)
Quality Of Service - Requested QoS
Length: 12
00.. .... = Spare bit(s): 0
..00 0... = Quality of Service Delay class: Subscribed delay class (in MS to network direction) (0)
.... .000 = Reliability class: Subscribed delay class (in MS to network direction) (0)
0000 .... = Peak throughput: Subscribed peak throughput/reserved (0)
.... 0... = Spare bit(s): 0
.... .000 = Precedence class: Subscribed precedence/reserved (0)
000. .... = Spare bit(s): 0
...0 0000 = Mean throughput: Subscribed peak throughput/reserved (0)
000. .... = Traffic class: Subscribed traffic class/Reserved (0)
...0 0... = Delivery order: Subscribed traffic class/Reserved (0)
.... ..00 = Delivery of erroneous SDUs: Subscribed delivery of erroneous SDUs/Reserved (0)
Maximum SDU size: Subscribed maximum SDU size/reserved (0)
Maximum bitrate for uplink: Subscribed maximum bit rate for uplink/reserved (0)
Maximum bitrate for downlink: Subscribed maximum bit rate for downlink/reserved (0)
0000 .... = Residual Bit Error Rate (BER): Subscribed residual BER/Reserved (0)
.... 0000 = SDU error ratio: Subscribed SDU error ratio/Reserved (0)
0000 00.. = Transfer delay: Subscribed transfer delay/reserved (0)
.... ..00 = Traffic handling priority: Subscribed traffic handling priority/reserved (0)
Guaranteed bitrate for uplink: Subscribed guaranteed bit rate for uplink/reserved (0)
Guaranteed bitrate for downlink: Subscribed guaranteed bit rate for downlink/reserved (0)
000. .... = Spare bit(s): 0
...0 .... = Signalling indication: Not optimised for signalling traffic
.... 0000 = Source statistics description: unknown (0)
Packet Data Protocol Address - Requested PDP address
Length: 2
0000 .... = Spare bit(s): 0
.... 0001 = PDP type organization: IETF allocated address (1)
PDP type number: IPv4 address (33)
Dynamic addressing
Access Point Name
Element ID: 40
Length: 7
APN: uninet
Protocol Configuration Options
Element ID: 39
Length: 36
1... .... = Ext: 0x01
Configuration Protocol: PPP (0)
Protocol: IP Control Protocol (32801)
Length: 0x0a (10)
PPP IP Control Protocol
Code: Configuration Request (0x01)
Identifier: 0x46
Length: 10
Options: (6 bytes)
Primary DNS server IP address: 0.0.0.0
Protocol: IP Control Protocol (32801)
Length: 0x0a (10)
PPP IP Control Protocol
Code: Configuration Request (0x01)
Identifier: 0x47
Length: 10
Options: (6 bytes)
Secondary DNS server IP address: 0.0.0.0
Protocol: Password Authentication Protocol (49187)
Length: 0x06 (6)
PPP Password Authentication Protocol
Code: Authenticate-Request (0x01)
Identifier: 0x48
Length: 6
Data (2 bytes)
Peer ID length: 0 bytes
Peer-ID (0 bytes)
掃碼關注5G通信官方公眾號,免費領取以下5G精品資料
  • 1、回復“YD5GAI”免費領取《中國移動:5G網絡AI應用典型場景技術解決方案白皮書
  • 2、回復“5G6G”免費領取《5G_6G毫米波測試技術白皮書-2022_03-21
  • 3、回復“YD6G”免費領取《中國移動:6G至簡無線接入網白皮書
  • 4、回復“LTBPS”免費領取《《中國聯通5G終端白皮書》
  • 5、回復“ZGDX”免費領取《中國電信5G NTN技術白皮書
  • 6、回復“TXSB”免費領取《通信設備安裝工程施工工藝圖解
  • 7、回復“YDSL”免費領取《中國移動算力并網白皮書
  • 8、回復“5GX3”免費領取《 R16 23501-g60 5G的系統架構1
  • 對本帖內容的看法? 我要點評

     
    [充值威望,立即自動到帳] [VIP貴賓權限+威望套餐] 另有大量?jī)?yōu)惠贈送活動,請光臨充值中心
    充值擁有大量的威望和最高的下載權限,下載站內資料無憂
    neverfever
    初級會員



     發短消息    關注Ta 

    積分 226
    帖子 25
    威望 2765 個
    禮品券 0 個
    專家指數 -2
    注冊 2009-4-9
    專業方向  核心網
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-01-05 16:35:39  只看樓主 
    剛才的request字段貼錯了。上一個是因?yàn)橐苿?dòng)用戶的APN設置成uninet。。。

    Frame 1: 146 bytes on wire (1168 bits), 146 bytes captured (1168 bits)
    Arrival Time: Jan3, 2011 07:05:53.000000000 China Standard Time
    Epoch Time: 1294009553.000000000 seconds
    [Time delta from previous captured frame: 0.000000000 seconds]
    [Time delta from previous displayed frame: 0.000000000 seconds]
    [Time since reference or first frame: 0.000000000 seconds]
    Frame Number: 1
    Frame Length: 146 bytes (1168 bits)
    Capture Length: 146 bytes (1168 bits)
    [Frame is marked: False]
    [Frame is ignored: False]
    [Protocols in frame: raw:ip:udp:gprs-ns:bssgp:llcgprs:gsm_a_dtap:ipcp:ipcp:pap]
    Raw packet data
    No link information available
    Internet Protocol, Src: 0.0.0.1 (0.0.0.1), Dst: 0.0.0.1 (0.0.0.1)
    Version: 4
    Header length: 20 bytes
    Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
    0000 00.. = Differentiated Services Codepoint: Default (0x00)
    .... ..0. = ECN-Capable Transport (ECT): 0
    .... ...0 = ECN-CE: 0
    Total Length: 146
    Identification: 0x0000 (0)
    Flags: 0x00
    0... .... = Reserved bit: Not set
    .0.. .... = Don't fragment: Not set
    ..0. .... = More fragments: Not set
    Fragment offset: 0
    Time to live: 62
    Protocol: UDP (17)
    Header checksum: 0x7c5a [correct]
    [Good: True]
    [Bad: False]
    Source: 0.0.0.1 (0.0.0.1)
    Destination: 0.0.0.1 (0.0.0.1)
    User Datagram Protocol, Src Port: dnp-sec (19999), Dst Port: dnp-sec (19999)
    Source port: dnp-sec (19999)
    Destination port: dnp-sec (19999)
    Length: 126
    Checksum: 0x0000 (none)
    [Good Checksum: False]
    [Bad Checksum: False]
    GPRS Network Service, PDU type: NS_UNITDATA, BVCI 10121
    PDU type: NS_UNITDATA (00)
    NS SDU Control bits: 00
    .... ...0 = Request change flow: Not set
    .... ..0. = Confirm change flow: Not set
    0000 00.. = Spare bits: 0x00
    BVCI: 10121
    Base Station Subsystem GPRS Protocol
    PDU Type: UL-UNITDATA (0x1)
    TLLI: 0xd6c86a15
    TLLI: 0xd6c86a15
    QoS Profile
    Peak bit rate: 524200 bits/s
    ..1. .... = C/R: The SDU does not contain command/response frame type
    ...0 .... = T: The SDU contains signalling (e.g. related to GMM)
    .... 0... = A: Radio interface uses RLC/MAC ARQfunctionality
    .... .001 = Precedence: Normal priority (0x1)
    Cell Identifier: RAI 460-00-22337-37, CI 39031
    MCC: China (People's Republic of) (460)
    MNC: 0
    LAC: 22337
    RAC: 37
    CI: 0x9877
    Alignment Octets (0 bytes)
    LLC PDU
    MS-SGSN LLC (Mobile Station - Serving GPRS Support Node Logical Link Control)SAPI: GPRS Mobility Management
    FCS: 0xe324fe (correct)
    Address fieldSAPI: LLGMM
    0... .... = Protocol Discriminator_bit: OK
    .0.. .... = Command/Response bit: DownLink/UpLink = Response/Command
    .... 0001 = SAPI: GPRS Mobility Management (1)
    Unconfirmed Information format - UI, N(U) = 4
    110. .... .... .... = UI format: 0x0006
    ...0 0... .... .... = Spare bits: 0x0000
    .... .000 0001 00.. = N(U): 4
    .... .... .... ..0. = E bit:non encrypted frame
    .... .... .... ...1 = PM bit: FCS covers the frame header and information fields
    GSM A-I/F DTAP - Activate PDP Context Request
    Protocol Discriminator: GPRS session management messages
    0... .... = TI flag: allocated by sender
    .000 .... = TIO: 0
    .... 1010 = Protocol discriminator: GPRS session management messages (10)
    01.. .... = Sequence number: 1
    DTAP GPRS Session Management Message Type: Activate PDP Context Request (0x41)
    NSAPI: 0x05 (5)
    0000 .... = Spare bit(s): 0
    .... 0011 = LLC SAPI: SAPI 3 (3)
    Quality Of Service - Requested QoS
    Length: 12
    00.. .... = Spare bit(s): 0
    ..00 0... = Quality of Service Delay class: Subscribed delay class (in MS to network direction) (0)
    .... .000 = Reliability class: Subscribed delay class (in MS to network direction) (0)
    0000 .... = Peak throughput: Subscribed peak throughput/reserved (0)
    .... 0... = Spare bit(s): 0
    .... .000 = Precedence class: Subscribed precedence/reserved (0)
    000. .... = Spare bit(s): 0
    ...1 1111 = Mean throughput: Best effort (31)
    000. .... = Traffic class: Subscribed traffic class/Reserved (0)
    ...0 0... = Delivery order: Subscribed traffic class/Reserved (0)
    .... ..01 = Delivery of erroneous SDUs: No detect('-') (1)
    Maximum SDU size: 1500 octets (150)
    Maximum bitrate for uplink: Subscribed maximum bit rate for uplink/reserved (0)
    Maximum bitrate for downlink: Subscribed maximum bit rate for downlink/reserved (0)
    0111 .... = Residual Bit Error Rate (BER): 1*10-5 (7)
    .... 0000 = SDU error ratio: Subscribed SDU error ratio/Reserved (0)
    0000 00.. = Transfer delay: Subscribed transfer delay/reserved (0)
    .... ..00 = Traffic handling priority: Subscribed traffic handling priority/reserved (0)
    Guaranteed bitrate for uplink: Subscribed guaranteed bit rate for uplink/reserved (0)
    Guaranteed bitrate for downlink: Subscribed guaranteed bit rate for downlink/reserved (0)
    000. .... = Spare bit(s): 0
    ...0 .... = Signalling indication: Not optimised for signalling traffic
    .... 0000 = Source statistics description: unknown (0)
    Packet Data Protocol Address - Requested PDP address
    Length: 2
    0000 .... = Spare bit(s): 0
    .... 0001 = PDP type organization: IETF allocated address (1)
    PDP type number: IPv4 address (33)
    Dynamic addressing
    Access Point Name
    Element ID: 40
    Length: 15
    APN: blackberry.net
    Protocol Configuration Options
    Element ID: 39
    Length: 47
    1... .... = Ext: 0x01
    Configuration Protocol: PPP (0)
    Protocol: IP Control Protocol (32801)
    Length: 0x0a (10)
    PPP IP Control Protocol
    Code: Configuration Request (0x01)
    Identifier: 0x3e
    Length: 10
    Options: (6 bytes)
    Primary DNS server IP address: 0.0.0.0
    Protocol: IP Control Protocol (32801)
    Length: 0x0a (10)
    PPP IP Control Protocol
    Code: Configuration Request (0x01)
    Identifier: 0x3f
    Length: 10
    Options: (6 bytes)
    Secondary DNS server IP address: 0.0.0.0
    Protocol: Password Authentication Protocol (49187)
    Length: 0x11 (17)
    PPP Password Authentication Protocol
    Code: Authenticate-Request (0x01)
    Identifier: 0x40
    Length: 17
    Data (13 bytes)
    Peer ID length: 3 bytes
    Peer-ID (3 bytes)
    Password length: 8 bytes
    Password (8 bytes)

    對本帖內容的看法? 我要點評

     
    [立即成為VIP會員,百萬通信專業資料立即下載,支付寶、微信付款,簡單、快速!]
    五年陽光
    版主
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    C友·鐵桿勛章   管理·勤奮勛章   C友·紀念勛章   精華發帖   紀念勛章·七周年   財富勛章·萬元戶   專家·高級勛章   活動·勞模銀獎   活動·積極勛章   C友·活躍勛章   公益·環保勛章   紀念勛章·五周年   C友·五周年壇徽   活動·第一屆通信技術杯   活動·第二屆通信技術杯   紀念勛章·六周年  
    積分 27873
    帖子 6028
    威望 402735 個
    禮品券 1102 個
    專家指數 -2987
    注冊 2010-2-11
    專業方向  移動通信
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-01-05 19:27:55 
    這個是什么東西呀???

    對本帖內容的看法? 我要點評





     
    最新通信職位:廣東通信人才網 | 北京通信人才網 | 上海通信人才網 | 南京通信人才網 | 西安通信人才網 | 重慶通信人才網 | 中國通信人才網
    seacnboy
    初級會員



     發短消息    關注Ta 

    積分 324
    帖子 62
    威望 8658 個
    禮品券 0 個
    專家指數 -37
    注冊 2009-3-17
    專業方向  PS域GPRS核心網維護
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-02-08 16:44:44 
    有些手機同時支持幾個PDP,黑莓的就沒問題。。你這個33就是用戶沒有簽約,可以看下具體的代碼

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    wqz1983
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    積分 6867
    帖子 141
    威望 2596 個
    禮品券 0 個
    專家指數 -5
    注冊 2008-11-6
    專業方向  MSCBSC 移動通信網,通信業界資訊實時更新,海量技術&
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-05-13 11:16:34 
    正在學習中
    要看懂這個 要對信令流程了解

    對本帖內容的看法? 我要點評





    MSCBSC 移動通信網,通信業界資訊實時更新,海量技術資料下載,通信人才求職招聘,探討前沿通信技術。MSCBSC 移動通信論壇,通信工程師的技術交流基地,國內最大最專業的通信技術社區!
    http://gg1fic3.cn/bbs/index.php?fromuid=1001993
     
    最新通信職位:廣東通信人才網 | 北京通信人才網 | 上海通信人才網 | 南京通信人才網 | 西安通信人才網 | 重慶通信人才網 | 中國通信人才網
    eyeskiller
    銀牌會員



     發短消息    關注Ta 

    積分 3123
    帖子 105
    威望 21706 個
    禮品券 0 個
    專家指數 -110
    注冊 2008-7-29
    專業方向  無線網絡優化
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-05-19 19:43:23 
    這是用戶GPRS業務沒有注冊,一般是用戶欠費,或者開關過GPRS功能后,GPRS業務暫時關閉的信令吧,與GPRS service not allowed 差不多吧,我是這么理解的

    對本帖內容的看法? 我要點評

     
    [2分鐘擁有VIP權限和充足威望,可下載站內任何資料] [快速找到一份高薪的通信行業職位]
    feike3
    初級會員



     發短消息    關注Ta 

    積分 161
    帖子 31
    威望 868 個
    禮品券 0 個
    專家指數 6
    注冊 2011-3-3
    專業方向  通信
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-05-21 17:16:28 
    哥們用什么軟件抓的包啊

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    haoyuwudi
    初級會員



     發短消息    關注Ta 

    積分 283
    帖子 57
    威望 4779 個
    禮品券 10 個
    專家指數 -2
    注冊 2009-7-28
    專業方向  wap優化
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2011-05-23 17:00:05  QQ
    我建議抓一下Gb端口的數據包,看一看就知道了,且需要對應的Gr口數據包。

    對本帖內容的看法? 我要點評

     
    [2分鐘擁有VIP權限和充足威望,可下載站內任何資料] [快速找到一份高薪的通信行業職位]

    快速回復主題    
    標題
    內容
     上傳資料請點左側【添加附件】

    當前時區 GMT+8, 現在時間是 2025-01-11 10:42:56
    渝ICP備11001752號  Copyright @ 2006-2016 mscbsc.com  本站統一服務郵箱:mscbsc@163.com

    Processed in 0.519031 second(s), 21 queries , Gzip enabled
    TOP
    清除 Cookies - 聯系我們 - 移動通信網 - 移動通信論壇 - 通信招聘網 - Archiver