【資料名稱】：MGW commission 操作手冊

【資料作者】：未知

【資料日期】：未各

【資料語言】：英文

【資料格式】：DOC

【資料目錄和簡介】：

MGW commission 操作手冊

a)Establish a telnet or HTTP connection to OMU ip address,port 11111
ZIID:，ALA%，；查看邏輯文件和告警的連接。核查logical filename要和ALARMS關聯，否則進行下一步。
example: when connections have opened,you can change for instance alarms to be output tosome of those VPP devices:
ZIIS::<logical filename>F=ALARMSEV=VPP-97;
Which would result given logical files to be connected to device VPP-97 instead of logical file ALARM
b)Check the state of VPP-99 with the command :
ZIHI；當建立了告警打印連接時，vpp－99的狀態由bl變?yōu)閣o
if the VPP-99 is not in the WO-EX state,alarm are not printed via Telnet or HTTP.the connection for alarm printing is not established ,or it’s disconnected.
c)end session when you are ready
you can stop printing of alarms via Telnet or HTTP simply by closing the telnet terminal.