【資料名稱】：BSC試題

【資料作者】：tianmaxingkong

【資料日期】：2011-05=30

【資料語言】：中文

【資料格式】：DOC

【資料目錄和簡介】：

BSC題庫

一、單選題
1.BSC中的那個硬件單元實現LAPD concentration和multiplexing?
A.GSB.TRAUC.SRSD.TRH
2.BSC對DXU的控制是通過什么信令來進行的？
A.通過LAPD信令來傳送的，且不需要單獨的64Kbit/s信道。B.通過LAPD信令來傳送的，且需要單獨的64Kbit/s信道。C.通過控制鏈信令來傳送的，且控制鏈只能設在PCM的TS16。D.通過控制鏈信令來傳送的，且控制鏈可以設在PCM的任何時隙。
3.下面哪個MO正常工作狀態可以為DISABLE
A.ISB.TRXCC.TFD.DP
4.當我們作指令打開跳頻時，如果設置成HOP=TCH，它特指哪一種信道不跳頻
A.BCCHB.SDCCHC.TCH
5.When the BSC verifies the data stored in the BTS and finds a discrepancy, what action is taken?
A.The MO will be loaded and tested and the BTS parameters will be updatedB.The BTS will be taken out of service and an alarm is outputC.An alarm is output
6.What MO’s can be tested with command ordered equipment tests?
A.TG, TRXC, TX, RX&TSB.CF, IS, TF, TRXC, TX, RX&TSC.TG, CF, IS, TF, TRXC, RX, TX&TS
7.The BSC consists of which of the following groups of subsystems?
A.LHS, MTS, RCS, RTS, TAS, GSS, CCS and STSB.RCS, ROS, RTS, LHS, TAS, GSS, CCS and STSC.RCS, ROS, RTS, LHS, STS, GSS, CCS and HRS
8.Which command orders alarm setting of device alarms?
A.REALRB.RATARC.RASAR
9.Which command is used to define a combined report?
A.SDRSIB.SDRCIC.SDCRI
10.Which command is used to initiate the Call Path Tracing function?
A.RACPIB.RACTIC.RAPTI
11.When troubleshooting a class 1A fault, which commands are in the proper order of execution without having to go another OPI?
A.RXMFP, RXBLI, RXTEI, RXBLEB.RXMTP, RXBLI, RXMOI, RXMOCC.RXMSP, RXMFP, RXTEI, RXTLI
12.RLNRC：CELL=A，CELLR=B，KOFFSETN=3;指令執行后的結果是：
A.A小區的信號強度比B小區的信號強度大約3DbB.兩小區的邊界將向A小區推移C.兩小區的邊界將向B小區推移D.將會降低兩小區間的切換頻度.
13.200基站中的半永久連接中哪一項肯定是錯誤的。
A.RISPI：TSLOT1=RILT-0-1，TSLOT2=RILT-9-0；B.RISPI：TSLOT1=RILT-0-2，TSLOT2=RILT-9-1；C.RISPI：TSLOT1=RILT-0-3，TSLOT2=RILT-9-2；D.RISPI：TSLOT1=RILT-0-4，TSLOT2=RILT-9-3； （RILT-9-9）