MSCBSC 移動通信論壇
搜索
登錄注冊
網絡優化工程師招聘專欄 4G/LTE通信工程師最新職位列表 通信實習生/應屆生招聘職位

  • 閱讀:9410
  • 回復:16
大家都在什么時候出現7602告警
wqshs
金牌會員
鎵嬫満鍙風爜宸查獙璇? style=


 發短消息    關注Ta 

公益·慈善勛章  
積分 5590
帖子 435
威望 5399 個
禮品券 5 個
專家指數 11
注冊 2007-3-9
專業方向 
回答問題數 0
回答被采納數 0
回答采納率 0%
 
發表于 2007-07-29 16:05:54  只看樓主  QQ
經常會出現7602告警,有的時候是風扇的問題,還有的時候風扇沒有問題也會出現這個告警,大家有沒有碰到過這種情況,是怎么解決的呢。
掃碼關注5G通信官方公眾號,免費領取以下5G精品資料
  • 1、回復“YD5GAI”免費領取《中國移動:5G網絡AI應用典型場景技術解決方案白皮書
  • 2、回復“5G6G”免費領取《5G_6G毫米波測試技術白皮書-2022_03-21
  • 3、回復“YD6G”免費領取《中國移動:6G至簡無線接入網白皮書
  • 4、回復“LTBPS”免費領取《《中國聯通5G終端白皮書》
  • 5、回復“ZGDX”免費領取《中國電信5G NTN技術白皮書
  • 6、回復“TXSB”免費領取《通信設備安裝工程施工工藝圖解
  • 7、回復“YDSL”免費領取《中國移動算力并網白皮書
  • 8、回復“5GX3”免費領取《 R16 23501-g60 5G的系統架構1
  • 對本帖內容的看法? 我要點評

     
    [充值威望,立即自動到帳] [VIP貴賓權限+威望套餐] 另有大量?jī)?yōu)惠贈送活動,請光臨充值中心
    充值擁有大量的威望和最高的下載權限,下載站內資料無憂
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-07-29 16:07:28  只看樓主  QQ
    雖然不是重要告警,但是掛在上面不好看啊

    對本帖內容的看法? 我要點評

     
    [立即成為VIP會員,百萬通信專業資料立即下載,支付寶、微信付款,簡單、快速!]
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-07-31 19:01:42  只看樓主  QQ
    沒有回的啊。。。。

    對本帖內容的看法? 我要點評

     
    最新通信職位:廣東通信人才網 | 北京通信人才網 | 上海通信人才網 | 南京通信人才網 | 西安通信人才網 | 重慶通信人才網 | 中國通信人才網
    tyq_1874
    中級會員



     發短消息    關注Ta 

    積分 956
    帖子 8
    威望 517 個
    禮品券 0 個
    專家指數 0
    注冊 2007-3-13
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-01 18:20:50 
    7602告警的內容很多啊,風扇只是其中的一種,另外還有DL-bus broken的,還有數據庫bsc端和bts端的不一致的,很多的,是不是風扇告警看告警的附加信息不就知道了嗎

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    yb_tong
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    積分 6619
    帖子 186
    威望 564010 個
    禮品券 5 個
    專家指數 2
    注冊 2007-4-8
    專業方向  移動通信
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-04 16:01:16  QQ
    檢查是否對應位置的風扇氣流不通?導致對應位置板件溫度過高?

    對本帖內容的看法? 我要點評

     
    最新通信職位:廣東通信人才網 | 北京通信人才網 | 上海通信人才網 | 南京通信人才網 | 西安通信人才網 | 重慶通信人才網 | 中國通信人才網
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-05 15:19:04  只看樓主  QQ
    有的時候感覺都是正常的,風扇也沒有問題還是出現這種告警。

    對本帖內容的看法? 我要點評

     
    [2分鐘擁有VIP權限和充足威望,可下載站內任何資料] [快速找到一份高薪的通信行業職位]
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-05 15:21:06  只看樓主  QQ


    QUOTE:
    原帖由 yb_tong 于 2007-8-4 16:01 發表
    檢查是否對應位置的風扇氣流不通?導致對應位置板件溫度過高?

    有些時候出現在開通新站的時候,板件溫度過高是不會了,風扇工作也正常啊。

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    tomoato
    初級會員



     發短消息    關注Ta 

    積分 413
    帖子 22
    威望 1310 個
    禮品券 0 個
    專家指數 0
    注冊 2007-6-23
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-07 09:53:54 
    7602告警有兩種可能一種事風扇告警, 還有一種是硬件數據與BSC機房數據不匹配告警
    重新修改BTS數據就OK啦

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-08-29 10:52:18  只看樓主  QQ


    QUOTE:
    原帖由 tomoato 于 2007-8-7 09:53 發表
    7602告警有兩種可能一種事風扇告警, 還有一種是硬件數據與BSC機房數據不匹配告警
    重新修改BTS數據就OK啦

    應該是這樣的,謝謝。

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-10-08 17:57:19  只看樓主  QQ
    最近又發現了一種出現7602的情況,告警內容大意是:告警總線擁塞,還沒有找到好的解決方法,希望高手指教.

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    h200hh
    資深元老
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 36335
    帖子 1448
    威望 80948 個
    禮品券 98 個
    專家指數 134
    注冊 2006-10-8
    專業方向  無線接入系統
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-10-09 09:35:12  QQ


    QUOTE:
    原帖由 wqshs 于 2007-8-29 10:52 發表


    應該是這樣的,謝謝。

    在項目上做過所有基站告警的統計分析,對于7602,確實就是這兩種情況,但對于風扇的告警,可能是比較敏感,比如風扇的速度慢了,低于門限值,也會出告警.所以一要看附加信息,二要做統計分析,看那種情況出現次數多,再對應基站實際狀況找原因,而不是說告警掛在那里好不好看的問題.

    不妨勤快一點,把NED的描述帖上來,在看看,雖然描述一大堆,對于METROSITE ULTRASITE兩種站型,也就是同步,功率,風扇,溫度,傳輸,連接,數據,總線等幾個方面的原因.各個項目的情況不一樣,比較多的情況應該只有2-3鐘.



    7602 BCF NOTIFICATION
    Meaning
    A minor fault (or faults) has occurred in the base station.

    The fault reason can be read from the supplementary text field of the
    alarm.
    Supplementary information fields
    1-6XX XX XX XX XX XX
    123456

    1) rack (cabinet) number 4) type of unit
    2) shelf number 5) unit number
    3) slot6) subunit number

    See Alarm Structure
    Instructions
    METROSITE:對于METROSITE來講:

    Fault reason: BSS synchronisation failed. 同步失敗
    Instructions:
    1.Check the clock cabling between the external clock source
    and the BCF.

    Fault reason: External synchronisation signals disabled外部同步信號丟失
    Instructions:
    1.Check the clock cabling between the LMU and the BCF.
    2.Check that the GPS signal cable is connected to the LMU.

    Fault reason: Temperature inside the TRX is high.載頻內部的溫度太高 (海南)
    Instructions:
    1.Check whether the following alarm is active for fan unit:
    7605 BTS NOTIFICATION
    and follow the instructions given for the alarm.
    2.Even if there are no active alarms for the fan unit, check that no
    foreign objects obstruct the airflow.
    3.If alarm 7605 is not active, ensure that the
    ambient temperature of the base station is within acceptable
    limits.
    Note: An alarm is activated when the TRX unit internal temperature
    exceeds +80C.

    Fault reason: Temperature inside the TRX is low.載頻內部的溫度太低 (黑龍江)
    Instructions:
    1.Ensure that the ambient temperature is within acceptable limits.
    also check the fan unit.
    Note: An alarm is activated when the TRX's internal temperature
    is below -10C.

    Fault reason: Fan unit is broken. 風扇損壞
    Instructions:
    1.Check whether the fan unit is installed.
    2.When there is a fan unit installed, check if something has jammed
    the fan unit and remove the jamming object. Otherwise replace the
    fan unit.

    ULTRASITE:對于ULTRASITE來講:

    Fault reason: Power unit temperature is low.功率單元溫度太低
    Instructions:
    1.Ensure that the ambient temperature of the base station is
    within specified limits.
    2.Check that the heater is working properly if equipped.
    3.Replace the PWSx.
    Note: An alarm is activated when the PWSx internal
    temperature is below -10C.

    Fault reason: Transmission unit temperature is low.傳輸單元溫度太低
    Instructions:
    1.Ensure that the ambient temperature of the base
    station is within specified limits.
    2.Check that the heater is working properly if equipped.
    3.Replace the transmission unit.
    Note: An alarm is activated when the transmission
    unit's internal temperature is below -10C.

    Fault reason: Power unit has lost connection to temperature sensor.
    Instructions:功率單元與溫度傳感器之間的連接損壞。

    1.If another slot in the cabinet is empty, move the
    power unit into the empty slot.
    2.The temperature sensor is probably broken.
    Temperature changes cannot be measured.
    Replace the power unit.

    Fault reason: Transmission unit has lost connection to temperature sensor.
    Instructions:傳輸單元與溫度傳感器之間的連接損壞。

    1.Temperature sensor is probably broken.
    Temperature changes cannot be measured.
    Replace the transmission unit.

    Fault reason: BOI detected that connection to transmission unit is lost.
    Instructions:BOI檢測到與傳輸單元之間的連接損壞。
    1.Open the Nokia UltraSite BTS Hub Manager and
    check the active alarms. If this base station or
    other base stations beyond it otherwise operate
    properly, there is no need for an immediate
    repair. However, the transmission alarms for the
    faulty unit are not reported to the BSC nor the
    Nokia BTS Manager.
    2.Reset the faulty transmission unit.
    Note: Resetting the unit affects the traffic routed through it.
    3.If the alarm reappears after the transmission unit
    reset, switch the cabinet power off and on.
    4.If the alarm reappears after the recovery actions
    above, replace the faulty transmission plug-in unit.

    Fault reason: Cooling fan is broken. 風扇損壞
    Instructions:
    1.If something has jammed the cooling fan unit,
    remove the jamming object.
    2.Check which fan is giving the alarm from the
    supplementary information (rack/shelf/slot).
    3.If the TSxx fan is alarming:
    . Remove the TSxx in front of the fan. If the fan
    starts working, the removed TSxx is broken.
    . If the fan still does not rotate after the first
    TSxx was removed, reinsert it and remove
    the second TSxx. If the fan starts rotating,
    the second TSxx is broken.
    . If the fan does not work after the TSxx
    removal test, the fan is broken and must be
    replaced.
    4.For other fan alarms, replace the corresponding fan unit.
    5.Otherwise, replace the BOI.
    Note: This alarm is related to fans located in the back
    of the cabinet.

    Fault reason: Cabinet fan is broken.機柜風扇損壞
    Instructions:
    1.Check that the fan cable is connected to the door switch box.
    2.If something has jammed the cabinet fan unit, remove the
    jamming object. Otherwise, replace the fan unit.
    3.Replace the door switch box.
    4.Otherwise, replace the BOI.
    Note: This alarm is related to door fan.

    Fault reason: Cooling fan speed has reduced from the set speed.風扇的速度慢了,低于門限值Instructions:
    1.If the fan is dirty, clean the fan unit.
    2.If something has jammed the cooling fan unit, remove the
    jamming object. Otherwise, replace the fan unit.
    Note: This alarm is related to fans located in the
    back of the cabinet.

    Fault reason: Cabinet fan speed has reduced from the set speed.
    Instructions:機柜風扇的速度慢了,低于門限值
    1.If the fan is dirty, clean the fan unit.
    2.If something has jammed the cabinet fan unit,
    remove the jamming object. Otherwise, replace the fan unit.
    Note: This alarm is related to door fan.

    Fault reason: Heater is broken.
    Instructions:
    1.Check that the heater cable is connected to the door switch box.
    2.Check that the AC power supply is OK by measuring AC from
    the cabinet connection box (the heater always requires AC power).
    3.Replace the faulty heater, or the heater is not installed
    although it is defined in the configuration file,
    therefore an alarm is issued. Install the heater.

    Fault reason: Power unit output voltage fault.功率單元輸出電壓故障
    Instructions:
    1. Replace the faulty power unit.
    The cabinet has more than one power supply
    unit. The other power units are still functioning.

    Fault reason: Power unit input voltage fault.功率單元輸入電壓故障

    Instructions:
    1.Ensure that the input voltage is correct.
    2.Replace the faulty power unit. The cabinet has more than one
    power supply unit. The other power units are still functioning.

    Fault reason: No connection to power unit.功率單元連接故障
    Instructions:
    1. Check if the power unit is switched off.
    2. If the power unit is on, replace the faulty power unit.
    The cabinet has more than one power supply unit.
    The other power units are still functioning.

    Fault reason: Common rack PWS I2C bus is jammed.總線擁塞或混亂
    Instructions:
    1.Give a one-minute power reset to the whole BTS cabinet.
    2.Check the power unit(s) and power backplane connectors,
    and replace if faulty.

    Fault reason: Common rack EAC I2C bus is jammed.總線擁塞或混亂
    Instructions:
    1.Give a one-minute power reset to the whole BTS cabinet.
    2.Reset the BCF.
    3.If the cabling between the BOI and the Interface board on the
    top side of the cabinet is OK, replace the Interface board.
    4.Replace the BOI.
    5.Replace the common backplane.

    Fault reason: Mismatch between BSC/MMI configuration file
    and the actual configuration.數據庫bsc端和bts端的不一致的
    Instructions:
    1.Check that all units are installed and working OK.
    2.Check that the actual base station configuration,
    HW configuration file and BSC configuration match.
    Make necessary corrections.

    Fault reason: BSS synchronisation failed.同步失敗
    Instructions:
    1.Check the clock cabling between the external clock source
    and the BCF.

    Fault reason: External synchronisation signals disabled外部同步信號丟失
    Instructions:
    1. Check that the master clock source is OK.
    2. Check the clock cabling between the LMU and the BCF.
    3. Check that the GPS signal cable is connected to the LMU.

    Other fault reasons其他的原因還要參考BTS的告警手冊
    Instructions:
    See the Alarm Descriptions document included in the BTS SW release
    binder of the alarming base station type.
    Cancelling
    This is a start/cancel type alarm. Alarm is cancelled automatically.

    [ 本帖最后由 h200hh 于 2007-10-9 11:41 編輯 ]

    對本帖內容的看法? 我要點評





    想飛就飛,我是一頭快樂的豬;
    帶寬不重要,覆蓋是關鍵!

     
    [2分鐘擁有VIP權限和充足威望,可下載站內任何資料] [快速找到一份高薪的通信行業職位]
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-10-09 16:37:33  只看樓主  QQ
    真是太詳細了,謝謝了,以后還是要多看看NED了.

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    hnzkgh2007
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    積分 8882
    帖子 585
    威望 34005 個
    禮品券 8 個
    專家指數 -3
    注冊 2007-10-25
    專業方向  網優
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-11-07 15:29:05 
    7602告警的處理,關鍵是看其后面的附加信息內容具體情況具體對待

    對本帖內容的看法? 我要點評

     
    [2分鐘擁有VIP權限和充足威望,可下載站內任何資料] [快速找到一份高薪的通信行業職位]
    wqshs
    金牌會員
    鎵嬫満鍙風爜宸查獙璇? style=


     發短消息    關注Ta 

    公益·慈善勛章  
    積分 5590
    帖子 435
    威望 5399 個
    禮品券 5 個
    專家指數 11
    注冊 2007-3-9
    專業方向 
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2007-12-19 22:27:06  只看樓主  QQ
    最近又碰到一個,告警內容大概意思是:bsc與mmi配置不匹配,重做硬件數據庫或讓BSC重起一下就好了

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料
    ynlczhb
    銀牌會員



     發短消息    關注Ta 

    積分 3916
    帖子 224
    威望 3657 個
    禮品券 0 個
    專家指數 11
    注冊 2008-3-13
    專業方向  BTS
    來自 云南
    回答問題數 0
    回答被采納數 0
    回答采納率 0%
     
    發表于 2008-04-23 15:00:11  QQ
    學習學習,很不錯

    對本帖內容的看法? 我要點評

     
    熱點: 通信招聘職位 | 網絡優化全集 | WCDMA精品 | TD-SCDMA學習資料 | EVDO | MGW媒體網關資料

    快速回復主題    
    標題
    內容
     上傳資料請點左側【添加附件】

    當前時區 GMT+8, 現在時間是 2025-01-29 13:58:56
    渝ICP備11001752號  Copyright @ 2006-2016 mscbsc.com  本站統一服務郵箱:mscbsc@163.com

    Processed in 0.903582 second(s), 46 queries , Gzip enabled
    TOP
    清除 Cookies - 聯系我們 - 移動通信網 - 移動通信論壇 - 通信招聘網 - Archiver