【資料名稱】：天線資料

【資料作者】：天線資料

【資料日期】：10.17

【資料語言】：中文

【資料格式】：PDF

【資料目錄和簡(jiǎn)介】：

730376————739707(1800)
天線的相關(guān)資料
Type No. 738 813
Frequency range 870 – 960 MHz
Polarization Vertical
Gain 16 dBi
Half-power beam width H-plane: 120°
E-plane: 6.5°
Electrical downtilt 6°, fixed
Front-to-back ratio > 20 dB
Impedance 50 Ω
VSWR < 1.3
Intermodulation IM3 < –150 dBc
(2 x 43 dBm carrier)
Max. power 500 W (at 50 °C ambient temperature)
VPol Panel 870–960 120° 16dBi 6°T
Eurocell Panel
Vertical Polarization
Half-power Beam Width
Fixed Electrical Downtilt
870–960
V
120°
6°
936.1518/c Subject to alteration.
Input 7-16 female
Connector position Rearside
Weight 12 kg
Wind load Frontal: 460 N (at 150 km/h)
Lateral: 300 N (at 150 km/h)
Rearside: 1020 N (at 150 km/h)
Max. wind velocity 200 km/h
Packing size 2702 x 272 x 160 mm
Height/width/depth 2574 / 258 / 103 mm
Mechanical specifications
page 1 of 2 738 813
3
dB
10
0
120°
215°
6.5°
dB
10
3
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany . Telephone +49 8031 1 84-0 . Fax +49 8031 1 84-9 73
Internet: http://www.kathrein.de
936.1518/c Subject to alteration.
Material: Reflector screen: Weather-proof aluminum.
Fiberglass radome: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental
conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests: Kathrein antennas have passed environmental tests as recommended
in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Accessories (order separately)
731 651 1 clamp Mast: 28 – 64 mm diameter 330 g 3
738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 3
850 10002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 3
850 10003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 3
733 677 1 clamp Mast: 60 – 115 mm diameter 2.0 kg 3
733 678 1 clamp Mast: 115 – 210 mm diameter 2.6 kg 3
733 679 1 clamp Mast: 210 – 380 mm diameter 4.0 kg 3
733 680 1 clamp Mast: 380 – 521 mm diameter 5.3 kg 3
737 976 1 downtilt kit Downtilt angle: 0° – 8° 5.0 kg 1
Type No. Description Remarks
Weight Units per
approx. antenna
Eurocell Panels
The Approved Antenna Family
For Vertical Polarization
738 813 page 2 of 2
258
60
8.3
72
64
9
2574
2634
2674
103 1217
85
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which
includes the static mechanical load imposed on an antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by
oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.
These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany . Telephone +49 8031 1 84-0 . Fax +49 8031 1 84-9 73
Internet: http://www.kathrein.de