【資料名稱(chēng)】：SFF SPEC

【資料作者】：SFF COMMITTEE

【資料日期】：2010

【資料語(yǔ)言】：中文

【資料格式】：PDF

【資料目錄和簡(jiǎn)介】：

Abstract: This document defines the low speed electrical and management interface specifications for enhanced Small Form
Factor Pluggable (SFP+) modules and hosts. The SFP+ module is a hot pluggable small footprint serial-to-serial data-agnostic
optical transceiver. This document defines the high speed electrical interface specifications for 10 Gigabit/s SFP+ modules
and hosts. The 8.5 Gigabit/s high speed electrical interface specifications are defined in FC-PI-4. The modules may optionally
support lower signalling rates as well. The modules may be used to implement single-mode or multimode serial optical interfaces
at 850 nm, 1310 nm, or 1550 nm. The SFP+ module design may use one of several different optical connectors.
This specification provides a common reference for system manufacturers, system integrators, and suppliers. This is an internal
working specification of the SFF Committee, an industry ad hoc group.
This specification is made available for public review, and written comments are solicited from readers. Comments received
by the members will be considered for inclusion in future revisions of this specification.
Support: This specification is supported by the identified member companies of the SFF Committee.