【資料名稱】：GPEH Dis code

【資料作者】：alx

【資料日期】：11.28

【資料語言】：中文

【資料格式】：XLS

【資料目錄和簡介】：

Disconnection Codes
Cause NameDisconnection Cause CodeDisconnection Cause Sub-CodeTriggerIdentity ParameterComments備注 by Emma
Unspecified00Unspecified - all cases which will result in abnormal RAB disconnection and do not map to any of the ones described below.- 非無線網絡側原因居多，可以從UE問題，用戶強制掛機，主叫掉話被叫被動釋放等。
Radio Connection Supervision (RCS)10Other Radio Link Control (RLC) unrecoverable error.-This event will have all other (not max retransmission) possible Special purpose Processors RLC unrecoverable errors.無線環境原因，多為弱覆蓋，或者信號衰減過快等
Radio Connection Supervision (RCS)11Radio Link Control (RLC) unrecoverable error in UTRAN (maximum number of RLC retransmissions is reached).- 無線環境原因，多為弱覆蓋，或者信號衰減過快等
Radio Connection Supervision (RCS)12Radio Connection Supervision - expiry of timer (rcsAllRlLostTimer or rcsCchWaitCuTimer or hsDschRcLostT)- 無線環境原因，多為弱覆蓋，或者信號衰減過快等
Radio Connection Supervision (RCS)13Radio link failure indication leading to a release with Cause = transport.- 無線環境原因，
Radio Connection Supervision (RCS)14Radio link failure indication leading to a release with cause other than transport.- 無線環境原因，
Congestion21Congestion action - release triggered by congestion.Cell Id 擁塞問題導致
Transport30Transport network failure – All other CELLO_AAL2NCIFAILURE.- 傳輸側問題，AAL2NCI
Transport31Transport network failure - CELLO_AAL2NCI_TEMP_FAILURE.- 傳輸側問題，AAL2NCI
Transport32Transport network failure - CELLO_AAL2NCI_MANAGEMENT_INDUCED.- 傳輸側問題，AAL2NCI
Transport33Transport network failure - CELLO_AAL2NCI_OTHER_DC_IND_CAU- 傳輸側問題，AAL2NCI
O&M41Cell lock indication.Cell Id 小區狀態問題
Measurement control failure51MEASUREMENT CONTROL FAILURE that triggers a connection release - intra-frequency.- measurement control 信令失敗，同頻切換
Measurement control failure52MEASUREMENT CONTROL FAILURE that triggers a connection release - inter-radio access technology.-
Measurement control failure53MEASUREMENT CONTROL FAILURE that triggers a connection release - inter-frequency.- measurement control 信令失敗，異頻切換
Measurement control failure54MEASUREMENT CONTROL FAILURE that triggers a connection release - traffic volume measurement setup.
Soft Handover61Active Set Update complete message not received - addition.Scrambling Code of Radio Link to be added. 軟切失敗，添加不成功，請檢查鄰區列表中最優小區，
Soft Handover62Active Set Update complete message not received - deletion.Scrambling Code of Radio Link to be deleted. 軟切失敗，刪除不成功
Soft Handover63Active Set Update complete message not received - replacement.Scrambling Code of Radio Link to be replaced. 軟切失敗，無法進行主服務小區更新
Soft Handover64Handover Evaluation release events - _EVENT_BUFFER_EXCEEDED.Scrambling Code of Radio Link to be added/ removed. 切換失敗，添加或者刪除的BUFFER超時
Soft Handover65Due to ReleaseConnOffset (for a cell not in the neighbor set).Scrambling Code of the cell. 缺失鄰區
Soft Handover66High Speed-Downlink Shared Channel (HS-DSCH) Cell Change failure after A-DCH removal.- 軟切失敗，EUL業務
Soft Handover60Other Handover Evaluation failure reasons: (_UNSPECIFIED_RELEASE_CAUSE, _BUFFER_TIME_EXCEEDED, _CELL_SYNC_INFO_NOTAVAILABLE)Scrambling Code of the cell.
Inter Radio Access Technology (IRAT)71IRAT outgoing failure - Timer T_reloc_overall expires.GSM cell Id CS 異系統切換問題，無法切換到GSM小區上，超時掉話
Inter Radio Access Technology (IRAT)72Cell change outgoing failure Timer T_cellchange expires.GSM cell Id PS 異系統切換問題，無法切換到GSM小區上，超時掉話
Inter-Frequency Handover (IFHO)81IFHO failure - reception of PHYSICAL CHANNEL RECONFIGURATION FAILURE with cause other than physical channel failure received from the UE on the source frequency.Target cell Id 異頻切換失敗
Inter-Frequency Handover (IFHO)82IFHO failure - at expiry of timer Timer RRC T-PCR.Target cell Id 異頻切換失敗
Inter-Frequency Handover (IFHO)83IFHO failure - if ciphering is ongoing, and if RBs mapped on TM-RLC entities have been established, and if a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message is received that does not include one or both of the IEs COUNT-C activation time and Uplink counter synchronization infoTarget cell Id 異頻切換失敗
Channel Switching91Transition to a DCH connection has been initiated but can not be completed
High Speed Hard Handover101Selection of HS-DSCH connection, including a Hard HO has been initiated, but can not be completed
CN Hard Handover111timeRelocoverall (MO: Handover) expires.
CN Hard Handover112Relocation preparation procedure fails in source RNC due to either of the following:

RELOCATION PREPARATION FAILURE received

timeRelocPrep (MO: Handover) expires

ERROR INDICATION with procedure code "Relocation Preparation"

Iu User Plane Control121CN Triggered Initialisation Failure