【資料名稱】：optimizer使用手冊

【資料作者】：NOKIA

【資料日期】：2006

【資料語言】：英文

【資料格式】：PDF

【資料目錄和簡介】：

optimizer使用手冊，只是是全英文的。


1 About this procedure 9
1.1 NetAct compatibility and capacity information 9
1.2 Prerequisites 9
1.2.1 Functionality used in the operation 9
2 Overview of the procedure 11
3 Preparing for the network optimisation 13
3.1 Managing GIS settings 13
3.2 Checking site and antenna data 14
3.3 Creating adjacency and cell templates 14
3.4 Avoiding passive intermodulation in automated frequency planning 15
3.5 Managing primary downlink scrambling codes 15
3.6 Managing measurement data 15
3.7 Managing Optimizer options 16
4 Starting Optimizer 19
5 Managing network statistics 21
5.1 Pre-requirements for interference matrix creation 21
5.1.1 Managing BAL/MBAL 22
5.1.2 Ranking adjacencies 23
5.1.3 Starting measurements 23
5.1.4 Activating measurements with 32 or fewer BCCH frequencies 24
5.1.5 Using the BAL Rotation tool to measure more than 32 frequencies 25
5.1.6 Using MBAL and total FEP measurement of BSC S11 to measure more
than 32 frequencies 27
5.2 Retrieving KPI data 28
5.3 Creating an interference matrix 29
6 Analysing the network 31
6.1 Visualising network configuration data in Navigator 31
6.2 Visualising network configuration data on Map 32
6.3 Visualising network configuration in Browser 32
6.4 Calculating dominance and interference 32
7 Selecting scope 35
8 Managing optimisation plans 37
8.1 Creating an optimisation plan 37
8.2 Importing a CM plan to Optimizer 37
8.3 Opening an optimisation plan 38
8.4 Deleting an optimisation plan 38
8.5 Exporting an optimisation plan and merging it with a CM plan 39
9 Optimising adjacencies 41
9.1 Managing adjacencies manually 41
9.1.1 Creating adjacencies manually 41
9.1.2 Modifying adjacencies manually 41
9.1.3 Deleting adjacencies manually 41
9.1.4 Managing adjacency constraints 42
9.2 Optimising adjacencies automatically 42
9.2.1 Optimising GSM adjacencies 43
9.2.1.1 Selecting optimisation scope 45
9.2.1.2 Analysing input data 45
9.2.1.3 Managing BTS constraints 45
9.2.1.4 Editing optimisation parameter values 46
9.2.1.5 Running the adjacency optimisation algor
9.2.1.6 Verifying the optimisation result in tables
9.2.1.7 Provisioning adjacencies to the network
9.2.1.8 Verifying optimisation 47
9.2.2 Optimising WCDMA adjacencies 47
9.2.2.1 Selecting optimisation scope 49
9.2.2.2 Analysing input data 50
9.2.2.3 Editing optimisation parameter values 50
9.2.2.4 Running the adjacency optimisation algor
9.2.2.5 Verifying the optimisation result in tables
9.2.2.6 Creating the final adjacency list based on
WCDMA 52
9.2.2.7 Provisioning adjacencies to the network
9.2.2.8 Verifying optimisation 54
10 Editing network object parameters 55
11 Creating a frequency plan 57
11.1 Overview of the procedure 57
11.2 Starting Frequency Allocation 58
11.3 Creating frequency groups 59
11.4 Assigning frequency groups to BTSs 60
11.5 Setting the allocation scope 60
11.6 Setting manual separations 61
11.8 Performing frequency allocation 62
11.9 Checking the allocation results 63
11.10 Saving the frequency plan 63
12 Managing frequencies 65
13 Performing capacity and QoS optimisation 67
13.1 Importing a PAPU table 68
13.2 Selecting initial scope 68
13.3 Analysing network 68
13.4 Selecting optimisation scope 69
13.5 Defining optimisation settings 69
13.6 Running capacity optimisation 69
14 Verifying optimisation results 71
14.1 Analysing adjacency optimisation 71
14.2 Verifying the frequency plan 71
14.3 Using interference to analyse the quality of frequency allocation 72
15 Analysing network performance 73
15.1 Analysing network performance in Browser 73
15.2 Analysing interfering cells 74
16 Transferring the optimisation plan to the network 75
16.1 Provisioning adjacencies directly to the network 75
16.2 Exporting an optimisation plan to RAC database 76
16.3 Checking the consistency of the plan and provisioning the plan to the
network 76
17 Where to find more information 79
Appendix A. Optimisation cases 81
A.1 Visualising controller areas on Map 81
A.2 Visualising HSDPA 82
A.3 Visualising area codes 86
A.4 Performing ad hoc allocation 89
A.4.1 Starting frequency allocation 89
A.4.2 Creating frequency groups 91
A.4.3 Setting the parameters for ad hoc allocation 94
A.4.4 Performing the allocation and saving the results 95