【資料名稱】：S12_CD4 0_recovery_instructions

【資料作者】：ss

【資料日期】：ss

【資料語(yǔ)言】：中文

【資料格式】：DOC

【資料目錄和簡(jiǎn)介】：

S12_CD4 0_recovery_instructions
After installing S12 CD4.0 there has been identified some problems with the BTS parameters. The problem is caused by incorrect (old, not converted) BSD files taken into use after the CD4.0 activation.

The reason for this is either
1.Failure in file conversion (BSDCF3) or
2.Failure during the BSD file copying (converted files copied from TEMPOR to LFILES)or
3.Unexpected automatic database disk updating done by system before system restart



1. How to check if problem is present

1a) Check with MML -command ZEQO:BTS=<bts_id>:GPRS:; the following parameters:

Option 1 – fault is not present

EGPRS INACTIVITY ALARM START TIME........(EAS).... 08-00
EGPRS INACTIVITY ALARM END TIME..........(EAE).... 18-00
AMR RADIO LINK TIMEOUT...................(ARLT)... 36SACCH FRAMES (i.e. user defined non–default value)

Option 2 – fault is present

EGPRS INACTIVITY ALARM START TIME........(EAS).... 00-08
EGPRS INACTIVITY ALARM END TIME..........(EAE).... 00-18
AMR RADIO LINK TIMEOUT...................(ARLT)... 4SACCH FRAMES (i.e. default value)

1b) Following error log writing is received when trying to unlock BTS:

/*** DX ERROR: 16781 ***/
/*** BTS SW DOES NOT SUPPORT STIRC FEATURE ***/