看看愛(ài)立信工程是的DTinfo吧

里面有全面的指令

!*******************************************************************!
!****** INITIATING SIGNALLING AND TRAFFIC CONNECTION TO BSC1 *******!
!*******************************************************************!

C7SLIS=2-100, SLC=0, ST=C7ST2C-0, ACL=A1, SDL="BSC1-0, MALT-1";
C7SLIS=2-100, SLC=1, ST=C7ST2C-4, ACL=A1, SDL="BSC1-1, MALT-33";
C7RSIEST=2-100, LS=2-100, PRIO=1;

!************************************!
!***** BASE STATION CONTROLLER*****!
!************************************!

MGBSI:BSC=BSC1,R1=BSC1O, R2=BSC1I;

MGBSC:BSC=BSC1, BSCDATA=HRATE-1;!HALF RATE SUPPORT IN BSC!
MGBSC:BSC=BSC1, BSCDATA=NIRR-1;!NEGOTIATION OF INTERMEDIATE RATE!
MGBSC:BSC=BSC1, BSCDATA=MSCODER-1;!MULTIPLE SPEECH CODER SUPPORT!
MGBSC:BSC=BSC1, BSCDATA=BCIC-0;!CIRCUIT POOL HANDLING!
MGBSC:BSC=BSC1, BSCDATA=PHASE2-1; !GSM PHASE 2 ERROR HANDLING SUPPORTED!
MGBSC:BSC=BSC1, BSCDATA=MSLOT-4;!MAX TRAFFIC CHANNELS SUPPORTED FOR HSCSD!
MGBSC:BSC=BSC1, BSCDATA=14DOT4-1; !14.4KBIT/S CHANNEL CODING SUPPORT!

EXDRI:R=BSC1SO & BSC1SI, DEV=MALT-1&-33;
EXDRI:R=BSC1O& BSC1I,DEV=MALT-2&&-31, MISC1=2;
EXDRI:R=BSC1O& BSC1I,DEV=MALT-34&&-63,MISC1=34;
EXDRI:R=BSC1O& BSC1I,DEV=MALT-65&&-95,MISC1=65;
EXDRI:R=BSC1O& BSC1I,DEV=MALT-97&&-127,MISC1=97;

EXDAIEV=MALT-1&&-31;
EXDAIEV=MALT-33&&-63;
EXDAI:DEV=MALT-65&&-95;
EXDAI:DEV=MALT-97&&-127;

BLODI:DEV=C7ST2C-0&-4;

EXSPI:NAME=BSC1-0;
EXSSI:DEV1=MALT-1;
EXSSI:DEV2=C7ST2C-0;
EXSPE;

EXSPI:NAME=BSC1-1;
EXSSI:DEV1=MALT-33;
EXSSI:DEV2=C7ST2C-4;
EXSPE;

EXSCI:NAME=BSC1-0, DEV=MALT-1;
EXSCI:NAME=BSC1-1, DEV=MALT-33;

C7RAI:DEST=2-100;

C7LAIS=2-100, SLC=0;
C7LAI:LS=2-100, SLC=1;


BLODE:DEV=MALT-2&&-31;
BLODE:DEV=MALT-34&&-63;
BLODE:DEV=MALT-66&&-95;
BLODE:DEV=MALT-98&&-127;