無質(zhì)差，強(qiáng)度好，突然掉話


MS1
System Information Type 3

MS Tick: 1418269
Time: 09:23:02.40
ARFCN : 622 (GSM 1800)
L2 pseudo length : 18
Skip indicator : 0
Protocol discriminator : (6) Radio resources management messages
Message type : 27
Cell identity (CI) : 10083 (Hex 0x2763)
Location Area Identification
Mobile country code (MCC) : 460
Mobile network code (MNC) : 00
Location area code (LAC) : 12352 (Hex 0x3040)
Control Channel Description
MSCR : (1) MSC is Release '99 onwards
Attach/detach allowed (ATT) : (1) MSs in the cell shall apply IMSI attach and detach procedure
BS-AG-BLKS-RES : 1
CCCH-CONF : (0) 1 basic physical channel used for CCCH, not combined with SDCCHs
CBQ3 : (0) Iu mode not supported
BS-PA-MFRMS : 2 multiframes period
T3212 timeout value : (10) 1.0 hours
Cell options (BCCH)
Dynamic ARFCN mapping indicator (DN-IND) : (0) Dynamic ARFCN mapping is not used by the PLMN
Power control indicator (PWRC) : (0) PWRC Not set
DTX indicator : (1) The MSs shall use uplink discontinuous transmission
RADIO-LINK-TIMEOUT : 32
Cell selection parameters
CELL-RESELECT-HYSTERESIS : 12 dB Rxlev hysteresis for LA-reselection
MS-TXPWR-MAX-CCH : 0
ADDITIONAL RESELECT PARAM IND (ACS) : (0) System information type 16 and 17 are not broadcast on the BCCH
HALF RATE SUPPORT (NECI) : (0) New establishment causes are not supported
RXLEV-ACCESS-MIN : 12
RACH control parameters
Max retransmission : (3) Maximum 7 retransmissions
Tx-integer : (15) 50 slots used
Cell bar access : (0) Not barred
Call reestablishment : (1) Not allowed
Access control
Emergency Call allowed : (0) All MSs
Barred classes :
Rest Octets
Selection Parameters
cbq : 0
Cell reselection offset : (2) 4 dB
Temporary offset : (0) 0 dB
Penalty time : (0) 20 s
System Information 2ter indicator - Available
Early classmark sending control - Explicity accepted
BCCH scheduling is not sent in SI9
GPRS indicator
RA color : 0
SI13 position : (0) SI13 message is sent on BCCH Norm
Neither UTRAN nor CDMA2000 classmark change message shall be sent with the Early classmark sending
SI2QInd
SI2 Quater Position : (1) SI2 quater message is sent on BCCH Ext


Message dump (Hex):
06 1B 27 63 64 F0 00 30 40 C8
00 0A 17 C0 0C FD 00 00 82 00
40 1B

[ 本帖最后由 zhugeyingju 于 2012-11-20 11:40 編輯 ]