【資料名稱】：NSN-GSM載頻環測

【資料作者】：123

【資料日期】：2012-1

【資料語言】：中文

【資料格式】：XLS

【資料目錄和簡介】：

巡檢結果字段說明
FAILED REASON: CIRCUIT NOT FREE測試電路被占用
FAILED REASON: TEST RADIO CHANNEL CANNOT BE ALLOCATED測試所用信道不能被分配
FAILED REASON: TEST REPORT NOT FOUND FROM REPORT HISTORY沒有發現測試結果
FAILED REASON: BER/FER OUT OF RANGE誤碼率過高
FAILED REASON: BTS BUSY載頻時隙占用，不能被測試
FAILED REASON: HARDWARE FAILURE硬件故障，需進一步驗證
FAILED REASON: INVALID HOPPING MODE DUE TO HARDWARE LIMITATIONS開了基帶調頻無法測試
FAILED REASON: MEASURED POWER LEVEL DIFFERS TOO MUCH FROM DEFAULT功率值下降嚴重
FAILED REASON: RESULT IS NOT WITHIN THRESHOLD VALUE RANGE載頻測試結果不在門限值內
FAILED REASON: RX BRANCHES IN IMBALANCE; OTHER BRANCH MALFUNCTIONING接收分路不均衡
FAILED REASON: TEST NOT POSSIBLE不能被測試，需要驗證
FAILED REASON: THE TIMER OF THE TEST (IN BTS) HAS EXPIRED測試定時器（ IN BTS）已過期
FAILED REASON: UNSPECIFIED ERROR OCCURED DURING TEST測試過程中發現不明錯誤
PASSED測試通過