【資料名稱】：小橋DHCP服務器軟件

【資料作者】：默默

【資料日期】：20113-2-2

【資料語言】：中文

【資料格式】：DOC

【資料目錄和簡介】：

這是一個小巧實用的DHCP服務器軟件，完全免費，配置是在配置文件里完成的，不知何因在百度上還找不到此軟件。經(jīng)本人試用，發(fā)覺非常好用。我已將其漢化，為需要的朋友出點力。

初級視編室頑固不化
http://dvedit.5d6d.com
zlq_hysy@126.com
2009.07.15


What is a DHCP server?
-----------------------

A DHCP server assigns IP addresses to client computers
every time when they request it. The computer that
participate in a network asks for it's IP address at
startup. This is very often used in enterprise networks
to reduce the configuration effort. All IP addresses of
all computers are stored in a database that resides on
a server machine.

What is this DHCP server good for?
----------------------------------

I experienced the following situation: I have a desktop
computer and a laptop at work. Whenever I take my laptop
home I have to turn off the DHCP support and type in an
IP address and a subnet mask to communicate between my
home computer and the laptop. When I take the laptop back
to work I have to enable the DHCP support again. This is
very annoying and time consuming, because Windows requires
a reboot after a change in the IP settings.

With this DHCP server I can use my home computer as
a DHCP server and I can simply put the laptop on my small
IP network at home without any changes in the IP settings.


How to setup the static DHCP server?
------------------------------------

1.Put the dhcpsrv.exe and dhcpsrv.ini file into the
same directory somewhere on your computer.

2.You need to know the physical address of the computers
that are supposed to get an IP address assigned. The
physical address consists of 6 bytes and are given in
hexadecimal notation. Example: 01-02-03-04-05-06.

3a. Open the dhcpsrv.ini file and create a section for
each client including his (unique) IP address. Example:

[01-02-03-04-05-06]
IPADDR=1.2.3.4

[01-02-03-04-05-07]
IPADDR=1.2.3.5

3b. From V1.5 on you can also let the DHCP server perform
an auto-configuration. Instead of creating a section

[01-02-03-04-05-06]
IPADDR=1.2.3.4

you can let the DHCP server do that for you. You only
need to add the following to your settings section:

[Settings]
IPPOOL_1=1.2.3.4-200

Every unknown client will be automatically added to the
INI file just the same way as if you had put it in there
manually. Note that you can have as many as 10 different
IP pools (IPPOOL_0 ... IPPOOL_9). Each pool defines ip
addresses of the form a1.a2.a3.a4-b4. All IP addresses
between a1.a2.a3.a4 and a1.a2.a3.b4 are part of the pool.


4.Some settings are common for every client computer. You
can put them into a [General] section. Everything that is
not found in the physical address section is looked up in
the general section. Here is a typical [General] section:

[General]
SUBNETMASK=255.255.255.0
NODETYPE=8; Hybrid

5.You can setup additional entries. These entries are Router,
DNS and DOMAINNAME:

Router
------
ROUTER_1=1.2.3.4
..
ROUTER_9=1.2.3.9

DNS server
----------
DNS_1=1.2.3.10
..
DNS_9=1.2.3.19

DOMAINNAME=mydomain

6.Start the dhcpsrv.exe. If you are running Windows NT or
Windows 2000/XP/VISTA then the dhcpsrv will ask you whether you
want to use it as a service or not. This is a new feature
in the version 1.3.
The advantage of a service is that you don't need to logon
to start the dhcp server - it is automatically started.
You can not use the dhcp server as a service, if you
use Windows 9x. I recommend to put the dhcpsrv.exe into
the autostart folder if you are not running it as a service.

7.After you installed the dhcp server as a service you can
use the dhcpsrv.exe itself to start or stop the service.
Simply start it again. Otherwise you will find a little
icon in the lower right corner of your screen that allows
you to stop the dhcp server.


If you have any questions or recommendations:
E-Mail me: Uwe.Ruttkamp@gmx.net
or visit my WEB page: http://ruttkamp.gmxhome.de/