【資料名稱】：TD中的UE測量事件

【資料作者】：aaa

【資料日期】：2011-1-1

【資料語言】：中文

【資料格式】：DOC

【資料目錄和簡介】：

事件1A：一個主導頻進入報告范圍

事件1B：一個主導頻信道離開報告范圍

事件1C：一個不在Active set 里的主導頻信道的導頻信號強度超過一個在Active set里的主導頻信道
的導頻信號強度

事件1D：最好小區發生變化

事件1E：一個主導頻信道的導頻信號強度超過絕對門限值

事件1F：一個主導頻信道的導頻信號強度低于絕對門限值
異頻測量事件用2X來標識。

Event 2a: Change of best frequency.

2B事件：當前使用使用頻率質量低于絕對門限，非使用頻率質量高于另一絕對門限。

2C事件：非使用頻率質量高于一個絕對門限 。

2D事件：當前使用頻率質量低于某一絕對門限，用于啟動壓縮模式。

Event 2e: The estimated quality of a non-used frequency is below a certain threshold

2F事件：當前使用頻率質量高于某一絕對門限，用于停止壓縮模式。

異系統測量事件用3X標識。

3A事件：當前使用頻率質量低于一個絕對門限，而GSM小區質量高于另一個絕對門限

Event 3b: The estimated quality of other system is below a certain threshold

3C事件：GSM小區質量高于一個絕對門限

Event 3d: Change of best cell in other system

話務量測量事件用4X標識。

Reporting event 4 A: Transport Channel Traffic Volume becomes larger than an absolute threshold

Reporting event 4 B: Transport Channel Traffic Volume becomes smaller than an absolute threshold

質量測量用5X標識（As FDD Mode，It's Measurement of Downlink transport channel BLER）

Reporting event 5A: A predefined number of bad CRCs is exceeded

UE內部測量

Reporting event 6A: The UE Tx power becomes larger than an absolute threshold

Reporting event 6B: The UE Tx power becomes less than an absolute threshold

Reporting event 6C: The UE Tx power reaches its minimum value

Reporting event 6D: The UE Tx power reaches its maximum value

Reporting event 6E: The UE RSSI reaches the UE's dynamic receiver range

6F事件：當UE的下行接收時間和上行發射時間間隔大于絕對門限

6G事件：當UE的下行接收時間和上行發射時間間隔小于絕對門限

UE位置測量

Reporting Event 7a: The UE position changes more than an absolute threshold

Reporting Event 7b: SFN-SFN measurement changes more than an absolute threshold

Reporting Event 7c: GPS time and SFN time have drifted apart more than an absolute threshold