【資料成文時間】：2006-8-17
【語言】：中文
【頁數】：2
【何人（公司）所著】：hotbil
【文件格式】：word文檔
【文件原名】：GSM默認呼轉功能說明
【摘要或目錄】：愛立信交換機默認呼轉功能說明





默認呼轉功能比CFB、CFNRY、CFNRC等有條件呼轉級別低，當設置了相應的有條件呼轉后，相同條件下呼轉到有條件呼轉號碼。
比如SOSDCF-7時包含用戶忙、不可及、無應答時轉移，當同時設置CFNRC呼轉時，關機時被叫呼轉到CFNRC呼轉號碼，未設置CFNRC呼轉時，呼轉到DCF呼轉號碼。用戶忙、無應答呼轉類似。

一、設置默認呼轉指令（無需增加SUD=DCF-1功能，直接可以設置呼轉）
HGSSI:MSISDN=86XXXXXX,SS=DCF,FNUM=XXXX;

二、默認呼轉功能可以包含用戶忙、不可及、無應答3中有條件呼轉中的1種、2種或3種。由SUD=SOSDCF-X控制。

HGSDC: MSISDN=86XXXXXX,SUD=SOSDCF-X;
X取值對應的功能

1 = When the called mobile subscriber is busy
2 = When the called mobile subscriber does not reply
3 = When the called mobile subscriber is busy and does not reply
4 = When the called mobile subscriber is not reachable
5 = When the called mobile subscriber is busy and not reachable
6 = When the called mobile subscriber is not reachable and does not reply
7 = When the called mobile subscriber is busy, not reachable and does not reply

1＝用戶忙時轉移
2＝用戶無應答時轉移
3＝用戶忙、無應答時轉移
4＝用戶不可及時轉移
5＝用戶忙、不可及時轉移
6＝用戶不可及、無應答時轉移
7＝用戶忙、不可及、無應答時轉移
默認SOSDCF-7。.

三、默認呼轉功能比CFB、CFNRY、CFNRC等有條件呼轉級別低，當設置了相應的有條件呼轉后，相同條件下呼轉到有條件呼轉號碼。
比如SOSDCF-7時包含用戶忙、不可及、無應答時轉移，當同時設置CFNRC呼轉時，關機時被叫呼轉到CFNRC呼轉號碼，未設置CFNRC呼轉時，呼轉到DCF呼轉號碼。用戶忙、無應答呼轉類似。

四、呼轉時對主被叫的提醒功能
HGSDC: MSISDN=86XXXXXX,SUD=SODCF-X;

SODCF-X
0 = No notification to calling nor to served subscribers when the call is forwarded
1 = Notification to calling subscriber when the call is forwarded
2 = Notification to served subscriber when the call is forwarded
3 = Notification to both, calling and served subscribers when the call is forwarded
0=不提示主被叫
1=只提示主叫
2=只提示被叫
3=提示主被叫

提示主叫功能體現為在無應答呼轉時在被叫手機上可以看到“正在轉接呼叫”，主叫手機會聽到語音“您的呼叫已轉移”。

默認為SODCF-0