【資料成文時間】：
【語言】：
【頁數(shù)】：
【何人（公司）所著】：
【文件格式】：
【文件原名】：
【摘要或目錄】：RBS 2000 11C_1/10G_1 SW Release Note, LZY 213
1440/1 R8E
Table of Contents
1 Introduction 2
1.1 Summary 2
1.2 Reason for release 2
2 Requirements 4
2.1 Requirements of BSC software status APT 4
2.2 OMT/Remote OMT Requirements 4
2.3 Hardware requirements 5
3 Delivery Identities 12
3.1 RBS SW Published Identity 12
3.2 Document Identity 12
4 Trouble Reports 13
4.1 Corrected Trouble Reports, compared to RBS 2000 SW 11B/10F13
4.2 Corrected Trouble Reports, compared to RBS 2000 SW 11C/10G16
5 Additional Comments 17
5.1 System Improvements 17
5.2 If BSC R10, CF is sometimes not recovered automatically 17
5.3 Function Change Information 17
5.4 Upgrading the SW present on the Flash Card 18
5.5 Loading IDBs that require at least a certain RBS SW release 18
5.6 Old IDBs not to be re-used at EDGE HW Upgrade - MHWC 18
5.7 Installed TRUs should be powered on, if DXU-21 is installed 18
5.8 Old IDBs for CDU-F 2x6 configurations might become corrupt 19
5.9 Alarm: SO TRXC I1A: 10 – RX Communication Fault 19
5.10 RBS 2000 functions dependent of RBS type or RU type 20
6 References 21
7 Revision information 21
關(guān)注樓主